|
03-02-2016, 06:21 PM
|
#1
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
Jayco 154 BH shower caulk
I've seen a few posts about this and just curious if the partical board they use throughout the trailer is waterproof. Doesn't take long for it to evaporate off the walls after a shower but just seems like something else should be there. Also the trim that goes around the tub is not caulked so hoping the tub actually goes up the wall so all the water gets back into the tub. Anyone else see this with their flight slx?
|
|
|
03-02-2016, 06:23 PM
|
#2
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
Pic
Pic 1
|
|
|
03-02-2016, 06:25 PM
|
#3
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
Pic 2
Pic 2. Where the trim goes around the tub... No caulk?
|
|
|
03-02-2016, 10:43 PM
|
#4
|
Senior Member
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,726
|
NO caulk.... this is to let any water that gets behind that panel drain out... water does not run up hill so do not worry about it..
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days /2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12
|
|
|
03-02-2016, 11:11 PM
|
#5
|
Senior Member
Join Date: Aug 2013
Location: Bellingham,Wa.
Posts: 6,680
|
Quote:
Originally Posted by Seann45
NO caulk.... this is to let any water that gets behind that panel drain out... water does not run up hill so do not worry about it..
|
What I would worry about( maybe it's just me) but the screws wicking water into the paneling. I had to change out several screws on the outside because of water wicking in. In my opinion all those little screws should have a tiny "O" ring to keep water out. I also had to caulk both sinks. Would I caulk, yes I would then I would know 100% that no water gets in but I could still be wrong.
__________________
2010 Jayco Hybrid EXP21M
2013 Toureg TDI
|
|
|
03-03-2016, 06:54 AM
|
#6
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
Ok thanks guys. I figured that trim around the tub didn't need caulk or Jayco would have done it. Eventually your right about those screws though.. Some of them are pretty crooked and loose so I suppose they'll get a 1 over from me.
|
|
|
03-03-2016, 08:53 AM
|
#7
|
Member
Join Date: Sep 2014
Posts: 79
|
When I removed the tub from my trailer I found putty tape sealing the gap between the tub flange and the wall. I suspect the putty also seals the screw threads. I would run a thin bead of silicon around the top of the flange if it were me. I would also seal the top of the valve housing where it meets wall. Maybe its not necessary but then I am no longer concerned with it.
|
|
|
03-03-2016, 09:55 AM
|
#8
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
That's a pretty good idea I think I will do that just for some peace of mind
|
|
|
03-03-2016, 10:53 AM
|
#9
|
Senior Member
Join Date: May 2015
Location: Ottawa
Posts: 141
|
funny, mine has caulk on the top edge
__________________
2011 Swift SLX 154bh /2012 Rav4 V6 with airbags & 15k btu transmission cooler.
km counter: 1700
|
|
|
03-03-2016, 11:10 AM
|
#10
|
Senior Member
Join Date: Apr 2015
Location: Lancaster
Posts: 806
|
Quote:
Originally Posted by octane
funny, mine has caulk on the top edge
|
I just traded in my 2014 SLX 165RB a few weeks ago, so I can't look to verify, but I'm pretty dang sure my tub was caulked. The photos look exactly like my old unit.
Roger
__________________
TV 2010 Ford F-150 Supercab
TT 2016 Jay Feather 23RLSW
|
|
|
03-03-2016, 02:24 PM
|
#11
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
Ya it's almost like they just forgot to hit the tub with some caulk. They did do the corners of the trim and up the wall in each corner. It's not like they build these in 5 hours or anything
|
|
|
03-03-2016, 02:55 PM
|
#12
|
Senior Member
Join Date: Mar 2015
Location: Auburn, WA
Posts: 1,855
|
Here's a shot of my 2015 195RB Baja tub - you can see the caulk around the top of the tub. I also have a trim seal up the corner of the wall instead of caulk. Sure looks like something was missed on yours.
__________________
TT: 2019 ORV Timber Ridge 23DBS, Blue Ox SwayPro 15K/1500
TV: 2019 Ford F-250 XLT SuperCab LB, 6.2L, 4.30/e-locker, 4x4, 164" WB, RoadActive Suspension, 3216 payload
TV: 2014 RAM 1500 Big Horn CC (Traded in)
TT: 2015 Jay Flight SLX 195RB Baja Edition, Andersen No-Sway (Traded in)
|
|
|
03-03-2016, 06:28 PM
|
#13
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
I was looking at my picture and saw what I thougt was glue I'm for sure missing that trim and no caulk.. It's more of a pain to take it to the dealer for me than it is to just get some trim and do it myself. Thanks a lot guys
|
|
|
03-03-2016, 08:16 PM
|
#14
|
Senior Member
Join Date: Jun 2015
Location: smithville, ont.
Posts: 2,684
|
Good plan... Water shouldn't get behind anything. Add soap to the mix and it will be rank in no time. I would be surprised if mushrooms didn't appear.
There's no way it was designed for water to "run" out the bottom.
__________________
2016 North Point 341RLTS
520watts of solar. Morningstar MPPT
4 6volt 235ah Surrette batteries
2017 F-350 Platinum CC SRW
|
|
|
03-04-2016, 07:30 AM
|
#15
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
Ya I thought something was up with this.. I see what their talking about on other tubs and how not to caulk them but my trailer is different. ttavasc's pic shows exactly how mines supposed to be
|
|
|
03-04-2016, 02:42 PM
|
#16
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
Well here it is all fixed! A trip to home depot and I found the exact same stuff jayco uses and got some clear caulk. Maybe tonight I'll take a trailer shower instead lol. Thanks a lot guys
|
|
|
03-04-2016, 02:44 PM
|
#17
|
Junior Member
Join Date: Jan 2016
Location: Coarsegold
Posts: 26
|
Finished!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|