|
|
08-10-2016, 02:18 PM
|
#1
|
Member
Join Date: May 2015
Location: Manchester
Posts: 99
|
Class C bunk ladders violate Govt. safety regs.
ANSI A 14.2 and OSHA, Please see pic for label required attached to all commercially sold ladders.
Our 2015 Greyhawk bunk ladder has 16" spaces berween each step,, govt. regs specify for safety, each step will have 12 inches between each step.
This ladder we have is difficult to use and should be recalled-replaced by Jayco, in my opinion.
Lets start a thread to get something done by Jayco if you agree.
|
|
|
08-10-2016, 03:12 PM
|
#2
|
Senior Member
Join Date: Nov 2015
Location: Canon City
Posts: 230
|
I agree! My '16 Seneca has the same ladder in which I almost broke my leg the first time I used it!
__________________
Buddy Brown
2016 Seneca HJ
2004 Wrangler
|
|
|
08-10-2016, 03:23 PM
|
#3
|
Senior Member
Join Date: Apr 2016
Location: Kingman AZ and where our Seneca is today.
Posts: 3,121
|
I don't use ours... and YES! it SUCKS with the rungs so far apart. I would like to have a real one with real steps on it.
|
|
|
08-10-2016, 03:41 PM
|
#4
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,121
|
Quote:
Originally Posted by StevWb
Lets start a thread to get something done by Jayco if you agree.
|
They'll just go back to the old standard....... "no ladder provided", it was that way for many many years.
|
|
|
08-10-2016, 06:30 PM
|
#5
|
Member
Join Date: May 2015
Location: Manchester
Posts: 99
|
Yea, great idea, Paid $80, 000 and get a ladder, and then say "oh well"...
__________________
CbDaNang
|
|
|
08-10-2016, 06:36 PM
|
#6
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,121
|
I actually think your comparing apples and oranges with regards to step spacing standards. RV roof ladders have been 14" for years.
As to what I said neither our 01 class "c" Designer or the 08 SENECA came with bunk ladders.
__________________
DISNEY LOVERS
|
|
|
08-10-2016, 07:09 PM
|
#7
|
Senior Member
Join Date: Apr 2015
Location: Michigan
Posts: 2,650
|
The RV industry does not follow any codes, maybe some RIVA codes but they are a joke. When I was a general contractor we had a national construction code book that was updated every few years and everything was followed to the last word or you didn't pass inspection. Nothing in a RV is even close to meeting code of new homes, all steps are 8-1/4" rise max, check your inside/outside steps, egress windows in sleeping areas not even close, electrical what a mess. I know an RV is not a house but I am amazed what they get away with. So its a moot point even thinking Jayco cares about a ladder
|
|
|
08-11-2016, 10:51 AM
|
#8
|
Member
Join Date: Oct 2015
Location: Pawleys Island
Posts: 72
|
I want to work in the Government Department that is responsible for RV compliance issues! Gotta be a sweet job with lots of money and benefits, no accountability and you get to look at RV's and related matters all day. Sign me up!
I actually cannot believe we need the Government to solve these kinds of issues.
__________________
2016 Redhawk 23XM
|
|
|
08-11-2016, 12:52 PM
|
#9
|
Senior Member
Join Date: May 2015
Location: Campbell Hall
Posts: 2,835
|
Quote:
Originally Posted by cschiller
I want to work in the Government Department that is responsible for RV compliance issues! Gotta be a sweet job with lots of money and benefits, no accountability and you get to look at RV's and related matters all day. Sign me up!
I actually cannot believe we need the Government to solve these kinds of issues.
|
Got some BAD NEWS for ya...
Ain't no such gubbermint job. The industry created the RVIA years ago and the feds said "OK" and left it alone.
The same path that turned The Hayes Code (U.S. federally sponsored) into the MPAA ratings system.
Where's the balance point between a self-policing industry and the nanny-state?
__________________
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck
Sitting in The Cheap Seats.
And proud of it!
|
|
|
08-11-2016, 02:15 PM
|
#10
|
Senior Member
Join Date: Dec 2012
Location: NW AR (God's Country)
Posts: 2,051
|
Go camping...have fun!
__________________
Skip
2012 Eagle Super Lite HT 26.5RKS
2005 GMC 2500 SLT HD D/A
|
|
|
08-11-2016, 05:08 PM
|
#11
|
Senior Member
Join Date: May 2014
Location: North Western West Virginia
Posts: 671
|
Class C bunk ladders violate Govt. safety regs.
Grumpy is spot on... we can ..... and moan and complain, and the RV industry (not just Jayco) will respond by no longer providing ladders. Good grief folks... it's 2 steps up to the bunk. I'm 70 years old and use the bunk when the dog gets to the bed first....
__________________
The Logan's
2018 Jayco Alante 31v
Me, Dear Wife,
2 Bluetick Hounds
1 Newfoundland
1 Newfoundland / Black Lab Mix
1 Cairn Terrier
|
|
|
08-11-2016, 05:18 PM
|
#12
|
Senior Member
Join Date: Oct 2014
Location: Sparwood, BC
Posts: 2,800
|
Grumpy and The Logans are dead on with their message.
If you are not happy why did you buy your RV in the first place? The RV industry is what it is and do rely on feedback of customers, but it is still up to this industry what they do with the feedback information.
Have some self initiative and finish your RV the way you want it. That's what I have always done over the 50 plus years of RVing. Complainers don't get far in this world...........it is the do'ers what make things happen.
__________________
2014 Ram 1500 CrewCab 4x4 5.7 Hemi 3.92 Rear and Air Lift 1000
2005 Jayco Jay Feather LGT - 29Y GVWR-7000 lbs.
Dexter Axle Lift 4-9/16" - installed with sub-frame.
Pro Series 1200 lbs. WDH with Double Sway Bar.
Champion 3100/2800 watt Inverter/Generator-Onboard Solar Power
|
|
|
08-11-2016, 05:50 PM
|
#13
|
Senior Member
Join Date: Nov 2014
Location: Grove City, OH
Posts: 238
|
Government regulations aren't a good answer - all it will do it make things really, really expensive. Look at what it has done for aviation...
__________________
Ty & Deb Montag
Columbus, OH
2015 Jayco Seneca 36FK
2014 Honda CR-V toad
|
|
|
08-12-2016, 06:16 AM
|
#14
|
Member
Join Date: Oct 2015
Location: Harford County, MD
Posts: 48
|
Government regulation can be exactly what you don't want. Be careful hoping they will step in and "fix" something that doesn't necessarily need fixing.
__________________
2016 29MV
|
|
|
08-12-2016, 07:50 AM
|
#15
|
Senior Member
Join Date: May 2016
Location: San Antonio
Posts: 181
|
When I bought my FW, I looked it over and pretty much knew what I was getting into. I didn't have a bunk ladder, but I knew I could make one pretty easily. Couple of pieces of 1x4, some 1 inch dowels, and some wood glue are what I've used previously....and it certainly didn't cost $80.00. Kids still used the ladder, even after growing from 40 pounds to 140 pounds over the years.
|
|
|
08-12-2016, 07:53 AM
|
#16
|
Senior Member
Join Date: May 2016
Location: San Antonio
Posts: 181
|
Quote:
Originally Posted by ALJO
Grumpy and The Logans are dead on with their message.
If you are not happy why did you buy your RV in the first place? The RV industry is what it is and do rely on feedback of customers, but it is still up to this industry what they do with the feedback information.
Have some self initiative and finish your RV the way you want it. That's what I have always done over the 50 plus years of RVing. Complainers don't get far in this world...........it is the do'ers what make things happen.
|
I think you and I share a kindred spirit! More doing!
|
|
|
08-15-2016, 11:19 PM
|
#17
|
Senior Member
Join Date: Jun 2015
Location: Elk city
Posts: 186
|
Yep, the steps on that factory ladder are like climbing a barb wire fence in your stocking feet! Somewhere I saw a thread on replacing the factory ladder with a regular aluminum ladder. This got my wheels to turning. I paid a visit to our local metal scrap yard. Got lucky found a six foot aluminum folding ladder that was in good shape. I bought it for $5 bucks, cut the back legs off, and left them at the scrap yard. First I measured for the correct length that I would need for the ladder. I then cut the bottom side rails off to make it the length I needed. I made the cut the same angle as the bottom of the ladder.. I cleaned it up and painted it a dark metallic brown. I then glued strips of brown carpet on the steps, and I even covered the top of the ladder with carpet. I removed the rubber friction pads or feet from the bottom of the ladder that I cut off, and placed them on the Newley cut bottom. I then fashioned who metal tabs on the top of the ladder to fit into the slots on the edge of the bed. The ladder works great! It's much safer, lighter, and sooooo much easier on your feet!
|
|
|
08-22-2016, 01:17 PM
|
#18
|
Senior Member
Join Date: Jun 2015
Location: Elk city
Posts: 186
|
|
|
|
08-22-2016, 01:21 PM
|
#19
|
Senior Member
Join Date: Nov 2011
Location: Secret Cove
Posts: 10,701
|
Nicely done!
__________________
2010 Jayco Feather Sport 22'6" (sold)DrawTite,12,000 lbs. 2017 Jayco 212 QBW BAJA (bought)
2011 Ford F-150 XLT SCab 4x4 Tow Package
"If you can't be smart; be stubborn.". DG.
|
|
|
08-24-2016, 06:21 AM
|
#20
|
Junior Member
Join Date: Aug 2016
Location: Cape Coral
Posts: 28
|
Quote:
Originally Posted by mike837go
Got some BAD NEWS for ya...
Ain't no such gubbermint job. The industry created the RVIA years ago and the feds said "OK" and left it alone.
The same path that turned The Hayes Code (U.S. federally sponsored) into the MPAA ratings system.
Where's the balance point between a self-policing industry and the nanny-state?
|
Actually there is an agency in the Federal Government that is very interested in stupid things that RV manufacturers do. It is the National Highway Traffic Safety Agency and you can file a complaint here http://www-odi.nhtsa.dot.gov/contact.cfm
When I purchased a new Montana in 2014 the rear escape window latch broke within the first 500 miles. Dealers, and Keystone RV could not get replacement latches so many owners, myself included had to zip tie or wire tie these windows closed. This went on for months with Keystone saying they could not get the latches. Several folks filed safety complaints with the NHTSA including myself. A Federal Investigator telephoned me within a week of my complaint being filed to get additional information. They were also conducting an investigation because Keystone had let some fivers leave the factory with the ladder on the wrong side, thus totally blocking the escape window in back!
Anyhow, about a month after the investigation started and the NHTSA
notified Keystone RV, the latches became available. After a couple of conversations with the NHTSA investigator I am convinced that they take any safety complaint seriously. And I guarantee you that the RV maker takes the NHTSA seriously. Keystone Customer Service must have called me and emailed me 3 or 4 times to make sure my window was finally fixed and I was a happy camper.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|