Originally Posted by Luvthenw
Can you provide more info or a pic on the thermostat for the fan? A separate thermostat would be a lot easier to access consider the ceiling height of the vent.
The 5th is at the storage lot so it'd be a while before I can get a pic. Our models are very similar in layout and in our floorplan both thermostats are just to the right of the sink. In your floorplan I'd estimate just over the right hand sink would be about the location.
I expect your fuse/converter is in the same location as mine (facing the door next to the steps up to the bath/bedroom) so the wires are probably routed down the same wall headed for the fuse box.
I expect our basements are pretty similar as well. You might be able to get a better idea of the routing by taking the back wall in the basement off and look at the wiring as it heads for the fuses. I've had mine off twice now and the biggest part of the job is taking all my "stuff" out, it's held in place with 8 or so those square drive screws that Jayco seems to be fond of.
The fan thermo is mechanical and an RV furnace type thermostat would probably work. I "think" my thermo is intended for use with a fan as it doesn't have any switches (off/on, fan/auto...), just the lever for selecting a temperature.
2013 F-350 CC SB 2WD 6.7PS
2013 Eagle Premier 351 RLTS
-SOLD- 2012 X23B
-SOLD- 2003 Ford Expedition 5.4, Bilstein shocks