Originally Posted by Camper_bob
Does that kink in the hose right by the tank inhibit flow? It looks like you could screw on an elbow so the hose doesn't have to make such a severe turn causing that kink...
Didn't trouble shoot it when i picked it up unfortunately. I figured it was done by professionals and should work. But, I'm worried about that kink too. It looks like because of such a severe turn it may inhibit or slow down the flow. Should have done it at the dealer when I was checking out
The good thing is the dealer is located 5 min from my house and If it doesn't work properly I will be calling them. I'm trouble shooting it this weekend and will let you know. With part and labor it was about $150 total.