ignitor board ?,99 eagle pop-up

[katt68]

good day,
my furnace does not ignite ....
the blower starts, everything seems to be happening but i get no clicking sound .
i have been told to check and clean the contacts on the ignitor board and i have but still no change.
is it the board itself possibly?
where can i get one?
please advise.
thanks

[Terry]

First of all - Welcome to the forum!!!! Glad you found us. If you get some time, come on over to the new member forum and introduce yourself.

On the furnace, check under my signature and you will find a link to the Atwood Service Manuals. There may be some helping troubleshooting info in there.

It could be the board, but a more likely suspect is either the sail switch (senses the fan is running), or a limit switch. I would check those if you can before ordering a board.

[Seann45]

Are you on shore power or battery power? IF you are on battery the blower has to run at a certain speed before the igniter will spark.. it may run but may not run fast enough..

[Denise]

Welcome to the Jayco Owners Forum Katt68! Are you located in Amsterdam? Do you have access to a Jayco dealer/factory in the NL? If you aren't able to get the answers you need here, try contacting a local shop regarding your furnace and converter issues. There is another option if you would like to PM me.