Has anyone opened up the 12 v junction box on the floor of the left slideout on a Seneca 35GS?
The conduit underneath has come loose. The box on the floor doesn’t have screws showing to open it up. Figured I’d check here first before attempting to tear into it. Thanks for help in advance!
I have to replace the recliner, so I’ll look at it closer while it’s out and pry the box apart. I need to tighten the conduit if possible, without having seen it up close. I also want to tap into the 12vdc while I’m there.....
I have to replace the recliner, so I’ll look at it closer while it’s out and pry the box apart. I need to tighten the conduit if possible, without having seen it up close. I also want to tap into the 12vdc while I’m there.....
Thanks!
Steve
Mine was not tight, it had some movement, Was that way from the day of delivery. I thought you meant it fell out.
Noticed the conduit was hanging by the wires underneath the box - if its a normal conduit box, the attachment screws would be accessible topside behind the recliner. The bolted in recliner will be pulled out because the locking mechanism is broken. I also want to access the 12vdc area in the slide. I believe the box under the table is where the 110V side comes in. I'll be looking to pull the box apart behind the recliner if its just stapled together....
Pulled the box out behind the recliner, it’s nothing more than a pass through for lightweight wires coming through the floor into the wall for the 12v lighting....
DISNEY LOVERS
Linear Mode
