Doing a brake controller on our new Redhawk now. The connector you are looking for is behind the coin holder/cubby hole on the dash top, right of the steering wheel. Use a very small screwdriver or trim tool and pry gently working along the lower side of the plastic insert (cubbyhole). You will hear three tabs release. Then work along the top. When it pops loose, look in and you will see the factory connector. Grey, rectangle shape. Etrailer.com will sell you a harness for about $11 that will connect that to a good quality Tekshona controller.
__________________
Mike & Diane
2019 Redhawk 26XD (SOLD)
2019 Equinox LT 2.0T
|