|
|
08-13-2015, 03:46 PM
|
#1
|
Member
Join Date: Nov 2014
Location: las vegas
Posts: 61
|
helwig helper springs
before having job done on my 29 red hawk, did anyone cut the u bolts, on mine it looks like the back one is going to hit the muffler, and the front ones would rub on the sway bar if the bolts were not cut back, any suggestions before i have it done -thanks
|
|
|
08-14-2015, 02:49 PM
|
#2
|
Member
Join Date: Mar 2015
Location: Hudson Valley, NY
Posts: 41
|
I have a Greyhawk 29MV and had the Hellwigs adjusted to 2", the u-bolts did not need to be cut and I do not have any interference with the bolts. By the way, the adjustment made a world of difference in the handling of my rig.
|
|
|
08-24-2015, 10:04 AM
|
#3
|
Member
Join Date: May 2015
Location: Manchester
Posts: 99
|
On my new 2015mv Greyhawk I did have to cut one of the bolts that came in contact with something I forgot what..seems stuff under there could be in slightly different locations...a hacksaw and my old 70 year body was pooped...but the result well worth the effort...
Anyone could proobably do this job with a few of the right tools in my opinion..it's not Rocket Science.
__________________
CbDaNang
|
|
|
02-02-2016, 05:00 AM
|
#4
|
Member
Join Date: Dec 2015
Location: Newark,Delaware
Posts: 55
|
Interested in finding out more on adjustments to H springs. Who does the work, Jayco or private or self. Also what type of issues did you have? Do you feel it could help with rear swaying when a Truck approaches from rear and pass at 55+ mph. Any info would be helpful, Thanks
1ST RV Newbie
|
|
|
02-02-2016, 07:25 AM
|
#5
|
Senior Member
Join Date: Oct 2014
Location: NE Oklahoma
Posts: 187
|
Quote:
Originally Posted by frog
Interested in finding out more on adjustments to H springs. Who does the work, Jayco or private or self. Also what type of issues did you have? Do you feel it could help with rear swaying when a Truck approaches from rear and pass at 55+ mph. Any info would be helpful, Thanks
1ST RV Newbie
|
This was an issue discussed by several last year in the thread: "Warning suspension problems - Hellwig Springs adjusted incorrectly from the factory" which is accessible by searching key words to this headline.
|
|
|
02-02-2016, 09:56 AM
|
#6
|
Senior Member
Join Date: Mar 2015
Location: Port Orchard
Posts: 2,065
|
__________________
Don
|
|
|
02-02-2016, 10:14 AM
|
#7
|
Senior Member
Join Date: Jun 2015
Location: --
Posts: 2,392
|
Mine is in for service as I type. I asked the dealer to inspect the springs and what not. I'm told they are where they are supposed to be and they do not recommend touching them. I even asked them to call Jayco. They're not calling Hellwig though.
__________________
2023 Ford F-150 XLT SCREW 3.5EB (Max Tow Pkg., Black Appearance Pkg., Bed Utility Pkg.)
1727 Payload / 4150 RAWR
On the sidelines taking it all in.
|
|
|
02-03-2016, 12:17 AM
|
#8
|
Member
Join Date: May 2015
Location: Manchester
Posts: 99
|
this is covered extensively in this Jayco blog...
of course the dealer won't do anything...if you want most of the little stuff done you learn to do it yourself in my opinion....
there are pictures showing the two sets of springs, the Helwig and the factory...with a re-adjusted gap of 2 inches between them...
I did this adjustment after basically loading up my 2105 Greyhawk 29mv...so to compensate for the actual loaded weight...not the adjustment set at the factory with no load..
The ride is better, the rear end is up higher. a good thing for less bottoming out...
It is not a big job, with a breaker bar to loosen up the bolts, and the corect socket and wrench...one of the bolts when cinched down came into interference with the tailpipe as I recall..that was the hardest part, sawing a bit off the bolt...
I think this adjustment is well worth the time and effort...
by the way I put steel rollers on the trailer hitch frame to help with low clearance on the back end like driveways etc...
A better ride..yes, less sway too...cause less slop in the original spring adjustment.
__________________
CbDaNang
|
|
|
02-03-2016, 01:33 AM
|
#9
|
Member
Join Date: Dec 2015
Location: Newark,Delaware
Posts: 55
|
I got under the coach yesterday, front clearance was about 5" on both sides, and rear was around 3" 1/2- 4" on both rear. No load other then 3/4 tank of gas. I will be getting a front end alignment today to see if that could be contributing to front wandering.
Thanks
|
|
|
02-03-2016, 07:21 AM
|
#10
|
Senior Member
Join Date: Jun 2015
Location: --
Posts: 2,392
|
My coach handles fine on the road. I have no issues with it. I'm hesitant to play w/ the springs (esp. if Jayco tells me not to). I know others on this forum have reported improvements. I also know shifting more weight bias forward could help handling, but I wonder how those front tires are sitting weight wise once loaded up w/ gear and family?
__________________
2023 Ford F-150 XLT SCREW 3.5EB (Max Tow Pkg., Black Appearance Pkg., Bed Utility Pkg.)
1727 Payload / 4150 RAWR
On the sidelines taking it all in.
|
|
|
02-03-2016, 09:06 AM
|
#11
|
Senior Member
Join Date: Mar 2015
Location: Port Orchard
Posts: 2,065
|
I was also hesitant to make the adjustment. My rig already drove and rode much better than any previous MH. I made the adjustment anyway and can tell no difference in handling or ride. I have a hunch that I could have been one of the lucky ones to have a properly aligned front end. Perhaps if the front end alignment isn't quite right the handling could improve with the the adjustment. Just guessing.
__________________
Don
|
|
|
02-03-2016, 09:13 AM
|
#12
|
Senior Member
Join Date: Jun 2015
Location: --
Posts: 2,392
|
I had mine aligned before I picked it up. Maybe that has something to do with it. The dealer took it to a special shop that handles the E450s. Been using them for years they said.
__________________
2023 Ford F-150 XLT SCREW 3.5EB (Max Tow Pkg., Black Appearance Pkg., Bed Utility Pkg.)
1727 Payload / 4150 RAWR
On the sidelines taking it all in.
|
|
|
02-03-2016, 09:32 AM
|
#13
|
Senior Member
Join Date: Dec 2014
Location: FL
Posts: 11,281
|
Quote:
Originally Posted by frog
I got under the coach yesterday, front clearance was about 5" on both sides, and rear was around 3" 1/2- 4" on both rear. No load other then 3/4 tank of gas. I will be getting a front end alignment today to see if that could be contributing to front wandering.
Thanks
|
If the alignment doesn't solve the wandering, inflate the tires to the maximum printed on the sidewall and see if that helps. IMHO, tire inflation on door stickers etc. leaves the sidewalls 'squishy' for a softer ride, but that softer ride is often at the expense of good handling.
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
|
|
|
02-03-2016, 12:28 PM
|
#14
|
Junior Member
Join Date: Jan 2016
Location: Kokomo
Posts: 11
|
My question is to you guys that got the alignment, did Jayco pay for that or did you do it out of pocket. I think mine is off.
|
|
|
02-03-2016, 01:56 PM
|
#15
|
Senior Member
Join Date: Jun 2015
Location: --
Posts: 2,392
|
Jayco paid. Or Ford did. Somebody paid, but it wasn't me and I'm positive it wasn't the dealer.
__________________
2023 Ford F-150 XLT SCREW 3.5EB (Max Tow Pkg., Black Appearance Pkg., Bed Utility Pkg.)
1727 Payload / 4150 RAWR
On the sidelines taking it all in.
|
|
|
02-03-2016, 04:57 PM
|
#16
|
Senior Member
Join Date: Jul 2014
Location: Fuquay-Varina
Posts: 884
|
Quote:
Originally Posted by Jopopsy
I also know shifting more weight bias forward could help handling, but I wonder how those front tires are sitting weight wise once loaded up w/ gear and family?
|
I hit the CAT scales with our 31FK last year. We were fully loaded for a week long trip with full fuel, LP, and FW tanks. Occupants were DW, me and two grandkids. We have the forward kitchen which puts the loaded pantry in front. The front axle was overloaded by 140 pounds. A Greyhawk MV may be a different story, but you won't know until you run it across a set of scales.
__________________
2014 Greyhawk 31FK
2007 Honda Shadow Sabre 1100cc
|
|
|
02-04-2016, 01:17 AM
|
#17
|
Member
Join Date: Dec 2015
Location: Newark,Delaware
Posts: 55
|
I had the front end alignment, it was way out. Had to replace cas/cam bushings. It fixed the front wandering, and 75% of the push from passing trucks. I could drive it like this and be a happy camper. But I will install Helwigg front/rear sway bars, and steering stabilizers. And eventually upgrade the shocks. Thanks everyone for steering me thru this!!
|
|
|
02-04-2016, 01:31 AM
|
#18
|
Member
Join Date: Dec 2015
Location: Newark,Delaware
Posts: 55
|
I had mine aligned yesterday and it was way out, had to replace the cas/cam bushings. B4 front would wander, and trucks passing would push me out of lane. Now wandering is gone, and the rear sway is 75% gone. About what you expect. Happy now with it but will have the the front and rear Helwigg sway bars and steering stabilizers added. And eventually upgrade shocks. Yes Jayco paid, but go thru their customer service first or a Jayco dealer. Goog Luck
|
|
|
02-04-2016, 07:02 AM
|
#19
|
Senior Member
Join Date: Jun 2015
Location: --
Posts: 2,392
|
Quote:
Originally Posted by NC Roamer
I hit the CAT scales with our 31FK last year. We were fully loaded for a week long trip with full fuel, LP, and FW tanks. Occupants were DW, me and two grandkids. We have the forward kitchen which puts the loaded pantry in front. The front axle was overloaded by 140 pounds. A Greyhawk MV may be a different story, but you won't know until you run it across a set of scales.
|
I have both axle and wheel weights as it left the factory w/ full propane and fuel. I know I don't have a ton of play there as it is, so shifting even more weight forward before I sit my patookis in the seat makes me hesitate.
__________________
2023 Ford F-150 XLT SCREW 3.5EB (Max Tow Pkg., Black Appearance Pkg., Bed Utility Pkg.)
1727 Payload / 4150 RAWR
On the sidelines taking it all in.
|
|
|
02-04-2016, 03:34 PM
|
#20
|
Junior Member
Join Date: Jan 2016
Location: Kokomo
Posts: 11
|
I adjusted mine yesterday and it does feel like it doesn't sway as much. I called service where I bought it at and my alignment is approved through Jayco but I have to pay for it and they will reimburse me. So I have that scheduled for Monday. I am driving to California in a couple weeks so want to make sure it's going to handle good.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|