Jayco RV Owners Forum

Thread Tools Display Modes
Old 08-03-2016, 02:42 AM   #41
Senior Member
Join Date: Sep 2015
Location: North Greenbush, NY
Posts: 642
Originally Posted by klassic View Post
This mod was well worth the $4 cost of the dimmer.
Now I can have the whole area lit up like the sun or dimmed down to a respectable campfire dimmed level. And it's not obnoxious if I leave it on all night.
I used the manual knob dimmer and installed it in the storage area for easy reach.
Klassic - were you able to find both wires direct from the LED in the basement of your North Point? Or did you somehow have to run a dedicated ground wire?

Be Safe, and Everyone Goes Home,

2014 RAM Laramie 2500 w/6.7L Cummins Diesel and Automated Safety Hitch
2016 377RLBH Jayco North Point
300W of Suntech Solar w/Rogue MPPT Controller & Xantrex 2000W PSW Inverter
Fire_Instructor is offline   Reply With Quote
Old 08-03-2016, 05:45 AM   #42
Senior Member
Join Date: Jun 2015
Location: smithville, ont.
Posts: 1,724
They are behind the bottom drawer of the dresser.
And there is a hole into the basement the washer pipe goes through.
I cut the wire and ran 4 wire telephone cable (it's all I had) to the dimmer location on the basement wall beside the door.

2016 North Point 341RLTS
520watts of solar. Morningstar MPPT
2017 F-350 Platinum CC SRW
klassic is offline   Reply With Quote
Old 08-23-2016, 08:44 AM   #43
Junior Member
Join Date: Apr 2016
Location: Dunkirk
Posts: 4
Originally Posted by Pepsiking View Post
need-a-vacation...My wiring for the awning LED's was right inside the front storage compartment. If you open the passenger side storage it was at the very top to the left. I had almost given up until I accidently stumbled across the wiring one day. Good luck!
I have a 2016 Jayco 32bhds but cant find the wires in the front storage compartment. Did you have to remove any panels or something?
djs1970 is offline   Reply With Quote
Old 08-23-2016, 02:43 PM   #44
Senior Member
Join Date: May 2013
Location: Dale Hollow Lake Tn/Ky
Posts: 1,794
Guess my mod is more of a repair since my oem led strip pretty much died this summer. Only the first 2 ft light up now. Sooooooo I have ordered a replacement set that comes with dimmer and multi color settings. Now I have to figure out how to remove the oem lights as they are mounted in a plastic run that is clipped into the same metal groove that holds the awning material to the edge of the roof. Best I can tell is it will take a pair of needle nose and some yanking to pull it from the grove. Looks like plenty of room to mount the new strip along the top of the TT siding and connect directly into the wires feeding the oem strip.
Bassdogs is offline   Reply With Quote
Old 04-20-2017, 08:48 AM   #45
CTP's Avatar
Join Date: Mar 2017
Location: Gulf Coast
Posts: 73

2018 NP 377 RLBH -
CTP is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 03:29 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.