Atwood Furnace issue
Noticing a problem with my Atwood Furnace. Bear in mind, the control board was replaced right after the unit was delivered. That's when I found out there was no access to furnace and a hole had to be cut in basement storage to remove furnace to replace control board. I had noticed the unit not lighting all the time but on this camping trip, I decided to watch it closely. Some times the unit will try to ignite 3 times and shut off without ever lighting. It sits for awhile and then tries again, sometimes with same results. You can hear the igniter clicking and it is as if there is no fuel there. However, I turn on the stove and it lights easily each and every time. The unit has shut down during the night and the temps will drop down into the 50's inside the unit. We get up in the morning and recycle the thermostat and it may come on or not. Same process, igniter clicks up to three times and either ignites or doesn't. It is almost as if there is no fuel at the burner. This is a new unit and you can't get to it to service it so I was wondering if anyone has experience with this.
Thanks for your responses.
__________________
Joe Hinson
2010 Jayco Quest G2(SOLD)
2014 Jayco Eagle 33.5RETS
2007 Ram 2500 5.9L Cummins(SOLD)
2015 Ram 2500 6.7L Cummins 4WD
:)
|