Search JOF for the method to sanitize your fresh water tanks. Typically it's a small amount of bleach, mixed with 15 gallons of water, loaded into your holding tank and the pipes, where it will sit for 8 hours... Drain, fill with fresh , flush, drain, repete.
Your hot water heater is likely bypassed. If it is, your should flush the antifreeze from the lines first, so you don't push that into the hot water tank
The intake line from your fresh water tank is likely in bypass position from when they pumped antifreeze into your pipes. You will need to in bypass so that fest water from your holding tanks can be pumped into your lines
Check smoke detector battery- better yet, replace it.
Air in tires is a must. Set them when they are cold, and set them based on the sticker on your rig
Check the Water levels in batteries ( use distilled water only ) and connect to shore power for 24 hours to get a good charge on the battery. Start this when you will be available to check it every 30 minutes or so for the first few hours to ensure its not getting over heated due to a bad cell.
Jim & Kim from Colorado
2014 Eagle 30.5 RLS
2015 Dodge 3500HD SRW 6.7L
Click on my profile for Mods and notes