Mods to 377 RLBH?

[RedHorse1]

Originally Posted by Bookemdanno

Not a mod, but a repair I’ll need to fix from our latest travels. The center piece of molding over the dinning table fell off during our last leg to Disney.

Yeah, the Mouse is hard on equipment.

[Magnolia Tom]

Had the same thing happen to me Dan a few months ago

I used liquid nails and some brads to reattach mine


Sent from my iPhone using Tapatalk

[Magnolia Tom]

Yesterday we arrived at our camp site. Tried to get set up only to be thwarted by the landing gear. Couldn’t auto level, couldn’t manually level. Right front leg was not moving. Took the motor off and checked it and found it worked fine. Put back on and no movement. So I got the ratchet out to manually extend the leg. What a chore! Something is definitely binding or bound up because I needed a cheater bar to crank it. So, a new landing leg is on order


Sent from my iPhone using Tapatalk

[Bookemdanno]

Originally Posted by Magnolia Tom

Yesterday we arrived at our camp site. Tried to get set up only to be thwarted by the landing gear. Couldn’t auto level, couldn’t manually level. Right front leg was not moving. Took the motor off and checked it and found it worked fine. Put back on and no movement. So I got the ratchet out to manually extend the leg. What a chore! Something is definitely binding or bound up because I needed a cheater bar to crank it. So, a new landing leg is on order


Sent from my iPhone using Tapatalk

I’ve been there, done that! That is a beating to operate the landing gear manually!


Sent from my iPhone using Tapatalk

[klassic]

What!!! I hope I don’t have this to look forward to now.

[MadJoker TX]

Man sorry to hear that Tom, was it the same one you had fixed before?


Sent from my iPad using Tapatalk

[MadJoker TX]

Originally Posted by Bookemdanno

Not a mod, but a repair I’ll need to fix from our latest travels. The center piece of molding over the dinning table fell off during our last leg to Disney. It was held up there with 3 small dabs of liquid nails...not a nail to be found in it. I don’t know how it stayed up there this long? Easy fix...I’ll just drill a couple holes in the top and screw it to the rest of the molding.
Attachment 37903


Sent from my iPhone using Tapatalk

Mine is loose as well, matter of fact the whole left side is ready to fall off.


Sent from my iPad using Tapatalk

[Magnolia Tom]

Originally Posted by MadJoker TX

Man sorry to hear that Tom, was it the same one you had fixed before?


Sent from my iPad using Tapatalk

Mark

It’s the other side now. I think I’m going to order a second leg to have as a spare but dealer quoted $360 for one

Ouch


Sent from my iPhone using Tapatalk

[bdreinv]

Really nice!

[jasum]

Originally Posted by Magnolia Tom

Mark

It’s the other side now. I think I’m going to order a second leg to have as a spare but dealer quoted $360 for one

Ouch


Sent from my iPhone using Tapatalk

Tom can you order directly from LCI?


Sent from my iPhone using Tapatalk

[Magnolia Tom]

Jack

I looked on their website but didn’t find the part number so I’ll probably give them a call. But, I think their prices are MSRP


Sent from my iPhone using Tapatalk

[bdreinv]

I had that same problem on a toy hauler. After 5 years some one told me there was a rebuild kit for around 40 dollars! Might check.

[MadJoker TX]

Originally Posted by Magnolia Tom

Mark

It’s the other side now. I think I’m going to order a second leg to have as a spare but dealer quoted $360 for one

Ouch


Sent from my iPhone using Tapatalk

Shoot man sorry to hear it. Don't let it ruin your trip! Maybe I should order one just in case.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Magnolia Tom]

Originally Posted by MadJoker TX

Shoot man sorry to hear it. Don't let it ruin your trip! Maybe I should order one just in case.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Thanks Mark

Not going to ruin anything as I got the rig as level as I could manually cranking the landing gear. Since I couldn’t auto level, the mid stabilizers wouldn’t extend so I just used a couple bottle jacks under them.


Sent from my iPhone using Tapatalk

[ROC-REQS]

Originally Posted by Magnolia Tom

Jack

I looked on their website but didn’t find the part number so I’ll probably give them a call. But, I think their prices are MSRP


Sent from my iPhone using Tapatalk

Tom,

I had to call LCI to get part #s on our landing gear. They were very helpful.

Once you get the part number - check eTrialer - they may carry it. They carried the landing legs for our trailer.

Good luck.

[Magnolia Tom]

Originally Posted by ROC-REQS

Tom,



I had to call LCI to get part #s on our landing gear. They were very helpful.



Once you get the part number - check eTrialer - they may carry it. They carried the landing legs for our trailer.



Good luck.

Thanks Roc

I found it and they were about $20 more than the dealer.


Sent from my iPhone using Tapatalk

[ROC-REQS]

Originally Posted by Magnolia Tom

Thanks Roc

I found it and they were about $20 more than the dealer.


Sent from my iPhone using Tapatalk

Your dealer has a good price then because eTrailer was ~$50 cheaper then LCI's or our dealer's price for my landing leg.

Good luck

[Cannon]

Anyone have any advice on tire monitoring systems. I see lots of different brands online but don't know which one's actually work at that range.

[Magnolia Tom]

Originally Posted by Cannon

Anyone have any advice on tire monitoring systems. I see lots of different brands online but don't know which one's actually work at that range.

I use the TST 507 and haven’t had any issues with mine. It displays temperature as well as the pressure of each tire. It can monitor an 18 wheeler so you should be fine.


Sent from my iPhone using Tapatalk

[Cannon]

Thanks Tom