I decided to install my own TV's in my new 23 RLSW. After a long 8 hour day and numerous choice words I finally got the 40" LCD TV installed.
I had to modify the outer frame because the rear of the TV was not the same on both sides. Otherwise the TV would have sat at an angle in relation to the front of the cabinet.
I bought a double swing arm TV mount that locks in place and allows me access when needed.
I had to build the frame in place because it was not possible to slip it in fully built.
Getting it so that it was at the correct depth was the hard part. Had to make sure the TV would sit flush with the front frame and still lock in place.
My stereo is a Furrion DV 3200 that has a HDMI output and a audio input. I connected a HDMI cord to the TV from the stereo for a 1080P quality picture. I also connected a cord with a 3.5mm plug at the TV end and with a R/W RCA connection at the stereo end to the audio in connection.
I can now listen to the TV audio through the ceiling speakers. Not a lot of clearance from the slide, about an inch, but as they say, no harm no foul.