Installing scissor jacks

[zimbock]

I have a 2016 195RB Jay Flight and plan to install new scissor jacks on the front where the frame and cross piece meet. That seems like the best place anyway. The gas line though crosses very close to where the jack will fold up though it doesn't touch. I think there is enough slack to move it an inch or so. I'm wondering if others have installed jacks here and what if anything you did with the gas line.

[zimbock]

Nevermind. I'm just going to move the gas line about 4 inches.

[SkyBound]

I installed 2 more scissor jacks on my trailer. I used #14 self tapping hex head screws, 1 inch long, directly into the I-beam frame. 4 screws per jack. I also used lock washers as well. It was pretty straight forward and replicated how the other 4 were installed from the factory.