Jayco RV Owners Forum

Thread Tools Display Modes
Old 08-22-2016, 03:35 PM   #1
Junior Member
Join Date: Aug 2016
Location: Napa
Posts: 1
sway bar

In mounting my Husky sway bar on a 2016 J-flight SLX I centered the ball plate on the trailer frame leaving 1.25" above plate and 1.25" below. When I hook sway bar up it drops about 1.75" to the hitch. There are now 6- 3/8 holes holding plate on. How bad did I mess this up. And can I move the plate down 1.25". Help

TravlerTT is offline   Reply With Quote
Old 08-22-2016, 04:29 PM   #2
Senior Member
ALJO's Avatar
Join Date: Oct 2014
Location: Sparwood, BC
Posts: 932
Send a message via Skype™ to ALJO
Usually the 1 1/4 ball has a long shank, you can put washers underneath to lessen the height difference. But it is not really a big deal. What TT model number and what length?

2014 Ram 1500 CrewCab 4x4 5.7 Hemi 3.92 Rear and Air Lift 1000
2005 Jayco Jay Feather LGT - 29Y GVWR-6500 lbs.
Pro Series 1200 lbs. WDH with Double Sway Bar.
Champion 3100/2800 watt Inverter/Generator-Onboard Solar Power

ALJO 'Forever Young @ Heart' provide on their travels Music Entertainment to Senior Care Homes
ALJO is offline   Reply With Quote
Old 08-23-2016, 09:55 AM   #3
Senior Member
Join Date: Jun 2015
Location: Nashville
Posts: 342
I don't think you have anything to worry about. However, it is bothers you take the frame mounted bracket to a welding shop and have them remove the ball and re-weld it higher (or lower) on the bracket. That way the ball gets repositioned without drilling any additional holes in the frame. They could even fabricate a new mounting plate if necessary.
Hohenwald48 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 06:37 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.