50 to 30 amp connection question

[TCNashville]

Hey everyone, I'm currently camping and when I plugged the EMS into the 30 amp plug it basically fell out, it was that loose. So I got out my 50 to 30 amp adapter and plugged into that but the adapter is too long and the EMS just lays on the ground and I didn't want that so I zip tied it a little higher. Here's a pic of how I did it.

My question is about another type of adapter and I wanted some opinions on whether it would work without over heating. With this adapter I could plug directly into the 50 amp and then plug the EMS into that without any elevation loss so to speak. This is the one I was looking at: https://www.amazon.com/ABN-Plug-Adap...ct_top?ie=UTF8

[Grumpy]

You're better off with what you have and tying it up like you did. The one you are looking at are the ones that are known to fail/overheat. Or buy this one....

https://www.progressiveindustries.net/30-50-adapter

[norty1]

Also with that straight adapter you won’t be able to close the lid.

[Nathan S.]

I’ve used the one Grumpy recommended from progressive and haven’t had any issues. But closing the cover at some parks has been an issue. If I think it’s going to rain then I just loosely put a trash bag over it.