|
|
01-02-2012, 09:46 PM
|
#1
|
Senior Member
Join Date: Jan 2011
Location: Calif.
Posts: 381
|
Removing Decals
How do I remove the deacls from my Jayco?
__________________
Ernie
Cancer survivor, retired, living life to its fullest with my lovely wife Nancy and our dog Abbey.
2011 Eagle 330RLTS trailer
Reese straight line dual cam
17k wd hitch
2005 GMC diesel
Crew cab long bed
:Flag:
|
|
|
01-02-2012, 10:07 PM
|
#2
|
Senior Member
Join Date: Feb 2011
Location: Germantown, TN
Posts: 4,923
|
Hey Ernie - curious why you would want to?
I would imagine it would be a pretty significant undertaking to get all of the adhesive off. I still have some spots where I removed the dealer sticker where it still collects dirt....your is relatively new so I imagine there is not much sun fade on the trailer where you would see where the stickers were.
|
|
|
01-02-2012, 10:14 PM
|
#3
|
Senior Member
Join Date: Dec 2010
Location: North Idaho/Arizona
Posts: 5,446
|
I would have ordered our trailer without decals but that was not possible. A naked trailer looks better a few years down the road than one with peeling decals. Also when they are removed years later the ghost of the decal can still be seen. Some decals will last a lot longer than others and only time will tell the good from the bad. I would like to remove ours too and then have a paint shop put on some designs that would last. $$$$$$$$$$$$$$$
__________________
2011 Eagle 330RLTS with just about every option.
2017 Silverado 1500 4x4 5.3 with tow package. (no, we don't tow the Jayco with it.)
2018 Surveyor 265RLDS well equipped.
Life in the slow lane is still life.
|
|
|
01-02-2012, 10:20 PM
|
#4
|
Senior Member
Join Date: Sep 2011
Posts: 109
|
Quote:
Originally Posted by clutch
I would have ordered our trailer without decals but that was not possible. A naked trailer looks better a few years down the road than one with peeling decals. Also when they are removed years later the ghost of the decal can still be seen. Some decals will last a lot longer than others and only time will tell the good from the bad. I would like to remove ours too and then have a paint shop put on some designs that would last. $$$$$$$$$$$$$$$
|
Agreed. Nothing looks more distracting on a rig that flaking and peeling decals. Its weird how on my Jayco, only the RED decals have a bubble in it. THe silver and blue are just fine, but EVERY red one has an air bubble in it....only one has cracked, but i know its only a matter of time before the rest do the same.
|
|
|
01-02-2012, 10:22 PM
|
#5
|
Senior Member
Join Date: Feb 2011
Location: Germantown, TN
Posts: 4,923
|
Cross fingers - mine are still in good shape. Personally I would rather replace the decals down the road (I assume Jayco will carry them for years to come), but I also understand why you would want to. It does make it look a little like a FEMA trailer though...lol...
|
|
|
01-02-2012, 10:41 PM
|
#6
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
As far as removing decals, the Filon surfaces are the worst to deal with, the aluminum and gel-coat surfaces are easier (when new). I've heard that using some heat (hair dryer, etc.) along the edges of the decal to get the peeling process started works, and add heat as you go. Removing any residual glue left behind depends on the glue, sometimes a good fiberglass cleaner will bring it off. I bet a boat repair or auto body shop would know what to use.
UV damage is a decal's worst enemy. My decals look pretty good considering I have an '05' Eagle, but I apply a thin coat of Aerospace 303 Protectant to my TT 2-3 times a season, and it has helped on curbing UV damage to my decals.
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
01-03-2012, 07:59 AM
|
#7
|
Senior Member
Join Date: Sep 2010
Location: Waukesha
Posts: 608
|
Quote:
Originally Posted by tafische
Hey Ernie - curious why you would want to?
I would imagine it would be a pretty significant undertaking to get all of the adhesive off. I still have some spots where I removed the dealer sticker where it still collects dirt....your is relatively new so I imagine there is not much sun fade on the trailer where you would see where the stickers were.
|
Try this works great to get adhesive off anything. It's call GOO GONE
http://www.google.com/products/catal...d=0CGoQ8wIwAw#
__________________
Rod and Linda
SE Wisconsin
2018 330RSTS
2015 Silverado 2500
|
|
|
01-03-2012, 09:26 AM
|
#8
|
Senior Member
Join Date: Jan 2011
Location: Calif.
Posts: 381
|
Quote:
Originally Posted by tafische
Hey Ernie - curious why you would want to?
I would imagine it would be a pretty significant undertaking to get all of the adhesive off. I still have some spots where I removed the dealer sticker where it still collects dirt....your is relatively new so I imagine there is not much sun fade on the trailer where you would see where the stickers were.
|
I want to take them off while the trailer is new. A few years from now they will be peeling off.
__________________
Ernie
Cancer survivor, retired, living life to its fullest with my lovely wife Nancy and our dog Abbey.
2011 Eagle 330RLTS trailer
Reese straight line dual cam
17k wd hitch
2005 GMC diesel
Crew cab long bed
:Flag:
|
|
|
01-03-2012, 10:39 AM
|
#9
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
x2 for Goo Gone after peeling. Also WD-40 or 3M adhesive remover are good options. These only work on the adhesive once you pull the decals off.
Heat and a plastic putty knife is an option. Be careful with how long you heat and how much as you could loosen your exterior wall from the foam core if you do it too much.
Being vinyl it's tough to get the above agents under them to loosen the adhesive.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
01-03-2012, 12:05 PM
|
#10
|
Senior Member
Join Date: Aug 2011
Location: Manitoba Canada
Posts: 553
|
We have a car dealership and have to remove decals on a regular basis. We use a blow dryer on the high setting as the heat gun can burn a surface if your not careful. We take off the remainder with goo gone..
|
|
|
02-17-2012, 08:08 AM
|
#11
|
Junior Member
Join Date: Feb 2012
Location: Fargo ND
Posts: 12
|
Removal
I own a custom vinyl/decal shop. I am new to the forum as I just purchased my first TT for my son and I. 1999 Designer 3320. All the vinyl is faded. I am gonna replace it all myself of course. Per as removal of adhesive residue. Goo-Be-Gone is a joke. Here is the best stuff ive used. Its a non-toxic adhesive remover. You spray it on and most times a towel will take it off after 60 seconds for small decals maybe 2 runs at it. Larger ones you will want to use a plastic razor blade to scrape it and then wipe. It will take a couple runs but it works well. Afterwards just use a run of the mill cleaner to finish your cleaning.
Its the Rapid Remover
http://rapidtac.com/
any other ?'s feel free to email me
mjhagen@hotmail.com
__________________
M Hagen
05 F250 Superduty Harley Edition
1999 Jayco Designer 3320 FKS
4 Year Old Son, Vet Camper...Brennan
|
|
|
02-17-2012, 11:16 AM
|
#12
|
Junior Member
Join Date: Feb 2012
Location: Fargo ND
Posts: 12
|
Also, u wanna use isopropyl alc. to clean after adhesive remover. Nothing with ammonia in it like windex or something.
This is mainly if you are gonna reapply something new afterwards.
Mark
__________________
M Hagen
05 F250 Superduty Harley Edition
1999 Jayco Designer 3320 FKS
4 Year Old Son, Vet Camper...Brennan
|
|
|
02-17-2012, 12:43 PM
|
#13
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,109
|
GOOF OFF works great as well.
__________________
DISNEY LOVERS
|
|
|
02-17-2012, 02:59 PM
|
#14
|
Senior Member
Join Date: Feb 2011
Location: Gilmer, Texas
Posts: 1,053
|
Mayonaise or (be very careful) EZ-Off Oven cleaner.
|
|
|
02-18-2012, 06:30 AM
|
#15
|
Senior Member
Join Date: Nov 2011
Location: Northwest WY
Posts: 157
|
Quote:
Originally Posted by Ladywendolyn
We have a car dealership and have to remove decals on a regular basis. We use a blow dryer on the high setting as the heat gun can burn a surface if your not careful. We take off the remainder with goo gone..
|
The best option would have a car dealer remove them. They are experts at taking off decals.
They put a car dealer advertisement on my 2008 F250 just prior to me signing the papers. I said nope, the deals off. I charge $100 a month to advertise, either write up that contract, take off your advertisement, or the deal is off. The decal came off and no remaining signs it was ever there. So I know they are very good at removing them. LOL. Some people have asked what would I do if I had already signed the papers. Ask them nicely of course, if no results, I would file a police report for mal-mish on my vehicle and turned it into my insurance company. LOL
__________________
2012 Jay Flight 19RD TT
W/thermal package: R19 walls, R22 roof, R24 floor
2008 F-250 Ford FX4 6.8L V10/4.10 rear axle
Curt class V hitch
Reese trunion WD with dual cam
AC6CV/7 ex-W8RUR since 1954
|
|
|
02-18-2012, 08:34 AM
|
#16
|
Senior Member
Join Date: Apr 2010
Location: Minneapolis, MN
Posts: 224
|
I'd suggest checking with your Jayco dealer to see if they offer decal removal service. A guy with a Jayco 18D had his decals removed when he ordered it. Not sure if the removal was done at the factory or at the dealer. Here is a link with a few pics to give you an idea of what a trailer looks like in plain white:
http://www.jaycoowners.com/showthread.php?t=1111
__________________
2010 Jayco 17Z
2007 Jeep Commander Overland 4x4 HEMI
|
|
|
02-18-2012, 10:21 AM
|
#17
|
Senior Member
Join Date: Jan 2011
Location: Calif.
Posts: 381
|
I used my wife's hair drier & a little patiens to heat the decals. They peeled off rather easily. I used Goo Gone to remove the remaining adhesive.
__________________
Ernie
Cancer survivor, retired, living life to its fullest with my lovely wife Nancy and our dog Abbey.
2011 Eagle 330RLTS trailer
Reese straight line dual cam
17k wd hitch
2005 GMC diesel
Crew cab long bed
:Flag:
|
|
|
02-18-2012, 07:48 PM
|
#18
|
Senior Member
Join Date: Feb 2012
Location: SE Wisconsin
Posts: 455
|
I've always used a hairdryer, some goo gone, and a plastic razor to get the dealership decals off.
__________________
1998 Jayco Eagle 302FK (Honda EU3000is)
2016 GMC Sierra Denali 3500HD 4x4 Duramax/Allison
|
|
|
02-21-2012, 09:07 AM
|
#19
|
Junior Member
Join Date: Feb 2012
Posts: 5
|
Decals
Quote:
Originally Posted by bounder
How do I remove the deacls from my Jayco?
|
There is a 3M product wood grain on the can, If you spray it on the decals and leave it for 15 minutes, the decals will peel off like latex, I will look at a can and get you the proper name soon
|
|
|
03-04-2012, 08:40 PM
|
#20
|
Senior Member
Join Date: Jan 2011
Location: Calif.
Posts: 381
|
Check out our new decal.
It's Carson Peak, June Lake Calif.
__________________
Ernie
Cancer survivor, retired, living life to its fullest with my lovely wife Nancy and our dog Abbey.
2011 Eagle 330RLTS trailer
Reese straight line dual cam
17k wd hitch
2005 GMC diesel
Crew cab long bed
:Flag:
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|