 |
10-28-2018, 02:28 PM
|
#1
|
|
Junior Member
Join Date: Oct 2018
Location: Tollhouse
Posts: 2
|
Wired Backwards
My electric awning or twelve volt switch says in and the awning it goes out. The out goes in? Is it me the switch or what?thanks
|
|
|
|
10-28-2018, 02:32 PM
|
#2
|
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 21,570
|
When it gets out remove your finger from the out button or it will continue to roll back up and be backwards.
__________________
 Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Andersen Ultimate 3220
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
|
|
10-28-2018, 03:05 PM
|
#3
|
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 13,916
|
Switch is upside down easily fixable. Remove panel, squeeze fingers on switch and turn it over. Or if it's two wires, one top and one bottom reverse them.
__________________
 DISNEY LOVERS
|
|
|
|
|
10-28-2018, 03:08 PM
|
#4
|
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 21,570
|
Reverse polarity to the motor is what reverses it so Grump's solution may be the easy way.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Andersen Ultimate 3220
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
|
|
10-28-2018, 03:23 PM
|
#5
|
|
Senior Member
Join Date: Dec 2014
Location: FL
Posts: 11,281
|
Quote:
Originally Posted by Rettrav
My electric awning or twelve volt switch says in and the awning it goes out. The out goes in? Is it me the switch or what?thanks
|
Yup. It's an easy fix. Did they offer to fix it during your PDI?
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
|
|
|
|
|
10-28-2018, 03:57 PM
|
#6
|
|
Senior Member
Join Date: Mar 2015
Location: Port Orchard
Posts: 2,017
|
Sounds like the awning was rolled up the wrong way once. If you keep holding the switch to deploy it, it'll keep on going and wrap up the other way.
__________________
Don
|
|
|
|
|
10-28-2018, 05:54 PM
|
#7
|
|
Senior Member
Join Date: Oct 2016
Location: McCalla, AL
Posts: 1,227
|
The canopy should be on top of the tube as you are rolling it in or out.
|
|
|
|
|
10-28-2018, 06:26 PM
|
#8
|
|
Junior Member
Join Date: Sep 2017
Location: Panama City
Posts: 23
|
Still looking for my canapy after Michael.
|
|
|
|
|
10-28-2018, 07:31 PM
|
#9
|
|
Senior Member
Join Date: Mar 2015
Location: Port Orchard
Posts: 2,017
|
Quote:
Originally Posted by grimeshaus
Still looking for my canapy after Michael.
|
 ouch
__________________
Don
|
|
|
|
|
05-06-2022, 05:23 AM
|
#10
|
|
Junior Member
Join Date: May 2022
Location: Groves
Posts: 2
|
Good Morning, easy fix …. Pop the cover off of your switch, turn it 180 and good to go.
Ive read that holding the button continuously while it opens and cycles through works but it doesn’t
|
|
|
|
|
05-06-2022, 05:31 AM
|
#11
|
|
Senior Member
Join Date: Mar 2015
Location: Abingdon
Posts: 6,146
|
It sounds like the awning has flipped like others have said. If you hold the button, the awning will cycle back to the camper until it touches. This is mostly how "OUT" becomes "IN" and vice versa. Now, if the awning is over the top and "OUT" is "IN", then there's a problem.
__________________
2013 Jayco Eagle 328 RLTS
2021 Keystone Montana 3121RL
2013 F350 6.7L 4x4 CCLB
W/Air Lift air bags (front & rear)
Equal-I-Zer™ WDH & B&W Companion
|
|
|
|
|
05-07-2022, 08:17 AM
|
#12
|
|
Junior Member
Join Date: May 2022
Location: Groves
Posts: 2
|
Awning
Quote:
Originally Posted by TWP723
It sounds like the awning has flipped like others have said. If you hold the button, the awning will cycle back to the camper until it touches. This is mostly how "OUT" becomes "IN" and vice versa. Now, if the awning is over the top and "OUT" is "IN", then there's a problem.
|
Yes sir you are correct, that was exactly my issue
…. I probably wired it backward to begin with 😁
|
|
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
