Stabilizer Jack

[farnik78]

I drove into a hole and bent the piss out of one of my stabilizer jacks. I want to get the exact make and model so I can just unbolt and install the new one. The sticker is worn and I can’t read it and don’t see any other markings or engravings.

2015 Octane T31b . Can anyone tell me what the brand and model of the jack is?




Sent from my iPhone using Tapatalk

[Octane2Go]

I don't think these are that specific. I think they are standard RV scissor jacks. There is simply a slide in slot that they go into for mounting.

Anyone out there that can validate this? I don't have access to mine at the moment so I can't take pics or the like to show.

[bdreinv]

Have you tried to straighten out with a big hammer first.We did the same thing cutting across a wash!

[Nukeneck]

They are pretty standard although they come in different weight capacities. It should unbolt and the new one bolt on into the same holes.

https://www.etrailer.com/Camper-Jack...yABEgI3EPD_BwE

[farnik78]

Originally Posted by bdreinv

Have you tried to straighten out with a big hammer first.We did the same thing cutting across a wash!

Yeah that’s not going to cut it. The threaded part is bent and there’s no way it’s ever going to be straight


Sent from my iPhone using Tapatalk

[farnik78]

Originally Posted by Nukeneck

They are pretty standard although they come in different weight capacities. It should unbolt and the new one bolt on into the same holes.

https://www.etrailer.com/Camper-Jack...yABEgI3EPD_BwE

I think I’ll just order that one. I’m not sure if the holes will line up but worst case scenario is that I will have to re-drill which isn’t a big deal.


Sent from my iPhone using Tapatalk

[Jagiven]

Try amazon.com, They have lots on their website to look at. From there you can get a good idea of what you have. You do not need to be a member to order from them.

[DonaandDon]

shopped for them in height, the taller ones? Not so economical.