Another A/C mod

[PaulB12]

Ok, you a/c mod guru's, whether store bought or self made.
As seen in the pic I have one outlet and two supply ducts opposed to each other. I made a V shaped cut out to direct the air left and right.
Question....will this work? I have no way to gauge air flow.
PaulB12

[Quantum]

Mine is home made. You have to be able to adjust how much air is going in each direction. For my unit, one duct services only 1 vent in the front bedroom. The other duct services 3 ducts in the main cabin and bathroom. So I set mine to send about 75% of the airflow to the duct with more vents. I didn't have a better either, I just judged by feel.

[PaulB12]

I think I have 3 on one and 4 on the other.
I guess I'll try it out and see.
Only downside, maybe not, is I can't open the side vents on a/c anymore.
PaulB12

[pconroy]

I think the one outlet from the squirrel cage and into two ducts is pretty standard. Rather than pop $170, I 3D printed the pieces uploaded here. I just installed mine last night.



While I didn't formally measure the improvement, it is quite noticeable! The air coming out of the ducts will now fluff your hair.