Levelers not working

[Harleys house]

I have a 2022 Eagle HT 294 CKBS. The levelers are acting up. When I use the controller inside to "automatic level" it comes up with an error message "TO STEEP ANGLE" , trailer is on flat ground. When I use my phone App I can use manual control to lower all but the left rear one.
Can anyone give me any ideas as to what to do?

[MRichaud]

Originally Posted by Harleys house

I have a 2022 Eagle HT 294 CKBS. The levelers are acting up. When I use the controller inside to "automatic level" it comes up with an error message "TO STEEP ANGLE" , trailer is on flat ground. When I use my phone App I can use manual control to lower all but the left rear one.
Can anyone give me any ideas as to what to do?

Not sure, but you may need to reset/calibrate the system; it needs to "learn" where level is. Check the manual for the procedure.

[Harleys house]

It is finally working after:

1) Manuel wasn't much help, found re calibrating level on the tablet- after 20 minutes it still wasn't doing anything.

2) Would hit auto level it still would raise right rear, not the front and left rear was still up- manually raised all three legs hit auto level, right rear would go down and pop up an error message "Slope to Steep" ( trailer sets on level pavement)

3) Updated the BMpro--- fixed the problem