Remove Clearance Light Lens

[youracman]

I need to get some 12v pwr for a wireless sideview cam. How do you remove the lens from this clearance light? It apprears that there may be a slot to partially insert a flat-blade screwdriver and twist it? Difficult to see well as it is covered in (foggy) clear sealant.

TIA

[Markb5900]

Yes they pop off
Remember if you use power from the marker light, you have to have your headlights on to power the camera

[Lonetraveler]

There’s a slot there. I lost the lens on a clearance light and looked at a new clearance light while at the Jayco dealer. The slot is there, but the light sits so close to the gasket I don’t see any slots on any of my clearance lights and they are small slots too.

[youracman]

Thanks, guys-

I MAY luck out if the mobile tech I have used in the past can find/replace the video "switcher" buried somewhere in the dash on my rig (he is coming on April 5th .... he works Quartsite in the winter.)

The switcher is supposed to be behind the radio, but it isn't ...... and I can see/access the area for 18" or so back toward the firewall....no switcher. He may have to remove the dash lid I'm thinkin' and that's above my pay grade.

If it is not feasible to restore things to the OEM configuration, I plan to go with a wirele$$ setup and just run with my clearance lights on to power it. I am not a big side-camera fan and find those big ol' fashioned convex mirrors work just fine; but my daughter is the 2nd driver and she ain't much on mirrors only.

Best,
Ed S.