How do I remove the refrigerator vent cover

[Bigpoppa56]

[RogerR]

Turn the two black knobs until they are up and down. Pull gently on the top corners, tilt out and lift slightly to disengage the bottom tabs.

Reverse to re-install.

Watch out for wasps if you don't have screens under the hatches.

[Bigpoppa56]

Thank you very much, I guess that I can use a regular flat head screwdriver?

[Tunce the traveler]

Probably could but I use my fingers.

[RogerR]

X2 on fingers, or a dime or quarter. Should not be much resistance.

[Tunce the traveler]

And another thing, they’ve been known to blow off so after my before trip inspection I put a small piece of tape on either side of the door to prevent that from happening. In your case “ Black Duct Tape” an inch is enough.

[Grumpy]

Originally Posted by Bigpoppa56

Thank you very much, I guess that I can use a regular flat head screwdriver?

Originally Posted by Tunce the traveler

Probably could but I use my fingers.

A quarter works great too.