Slide not centered front to back - catches on thermostat
My 267bhsw slide is aligned properly as far as outward alignment but it needs to move about 3/4" toward the front of the camper. If I am not perfectly level, I have to be careful it doesn't rip the furnace thermostat off the wall when I slide it in. The seal on the rear also doesn't flap out like it's supposed to because the slide is too far back.
I have attached pictures of the lack of space between slide and furnace thermostat as well as one showing the seal not flapping out like it's supposed to.
Is there anything I can do at home to fix this or does it need to go to the dealer? We bought it in January and have used it about 8 times, but have towed it less than probably 600 miles. I don't recall it being this bad when we bought it but I also didn't pay attention to space between slide and thermostat.. So maybe it's been this way since the beginning.
|