Backup Camera

[Floridays]

Hey Everyone!

I have a 2009 Melbourne. I'm having a problem with my backup camera.

At one point the camera was working, but it was acting as if was getting a bad signal, like you would get on a TV. (snow).

I checked all the connections and they seem to be fine. The camera is not working now.

Any suggestions?

Thanks Stephen

[TX_Arvee]

Do you have the mirror cameras as well? If so there is another set of connections behind the drivers side kick panel under the steering column. Have you checked the camera to see if it has gotten water in it or if that connection is still good?

[Floridays]

Originally Posted by TX_Arvee

Do you have the mirror cameras as well? If so there is another set of connections behind the drivers side kick panel under the steering column. Have you checked the camera to see if it has gotten water in it or if that connection is still good?

I do not have the mirrors camera's. I did check the wiring under the dash and all connections seem to be in place. I also looked at the camera. I removed the wiring and took apart the connection and reconnected it. Seems to be ok. The camera is sealed not sure if I could open it.

Thanks for your reply

[snowbird47]

Not quite the same thing, but i have a 2012 Greyhawk 31 DS and my back-up camera works fine when put the transmission in reverse, but when I use the "Camera" setting on the entertainment/nav console it says "no signal" Jayco dealer was mystified
Anyone else have this problem?
I have no mirror cam.