 |
09-23-2020, 02:14 PM
|
#1
|
|
Senior Member
Join Date: Jun 2016
Location: Mechanicsville
Posts: 1,479
|
Inverter on 22J question.
Since I can't find the answer in the owner's manual, I'll ask here.
Which receptacle(s) are connected to the 1000W Inverter, besides the TV?
__________________
Erroll and Mary Doss and Duffy (RIP)
2018 Jayco Redhawk 22J
2014 F150 SC, 4x4, HD Pkg, Sterling Gray
|
|
|
|
09-23-2020, 02:15 PM
|
#2
|
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,109
|
Quote:
Originally Posted by Atlee
Since I can't find the answer in the owner's manual, I'll ask here.
Which receptacle(s) are connected to the 1000W Inverter, besides the TV?
|
Only other possiblity would be next to the bed for a C-PAP.
__________________
 DISNEY LOVERS
|
|
|
|
|
09-23-2020, 02:23 PM
|
#3
|
|
Senior Member
Join Date: Jun 2016
Location: Mechanicsville
Posts: 1,479
|
Thanks. I'll check it out.
Of course, if necessary, I would run the generator to power the C-PAP.
Quote:
Originally Posted by Grumpy
Only other possiblity would be next to the bed for a C-PAP.
|
__________________
Erroll and Mary Doss and Duffy (RIP)
2018 Jayco Redhawk 22J
2014 F150 SC, 4x4, HD Pkg, Sterling Gray
|
|
|
|
|
09-23-2020, 03:26 PM
|
#4
|
|
Senior Member
Join Date: Apr 2017
Location: Inland Empire, California
Posts: 2,006
|
Easy way to tell. Take a small lamp, or any low power 120 volt device, and plug it into each outlet while the inverter is on and you are not connected to shore power or generator. A voltmeter or outlet tester works great too. No guesswork needed.
__________________
Jim
Retired electronic technician (45 years in the field)
2017 Greyhawk 29W (solar & many other mods)
wife (maybe I should have given her top billing)
|
|
|
|
|
10-03-2020, 06:08 PM
|
#5
|
|
Junior Member
Join Date: Sep 2020
Location: Berkeley Heights
Posts: 5
|
Question for you Atlee, do you know where they install the inverter on the 22J? I just got one without an inverter, but thinking of installing with a solar setup. Just trying to figure out where it can fit..
|
|
|
|
|
10-03-2020, 07:52 PM
|
#6
|
|
Lost in the Woods
Join Date: Apr 2019
Location: Ocean County
Posts: 2,807
|
Quote:
Originally Posted by ChrisM23
Question for you Atlee, do you know where they install the inverter on the 22J? I just got one without an inverter, but thinking of installing with a solar setup. Just trying to figure out where it can fit..
|
My rig is similar to yours. I installed an inverter on the back wall of the sink cabinet. Since my batteries are in the entry step, it made a short run for the cables. Then I installed a dedicated outlet to the inverter in the side of the sink cabinet by the other switches (need to power up the coffee maker under all conditions). 
|
|
|
|
|
10-04-2020, 05:11 PM
|
#7
|
|
Senior Member
Join Date: Jun 2016
Location: Mechanicsville
Posts: 1,479
|
My 2018 22J has the 1000 Watt installed on the floor under the wardrobe.
Quote:
Originally Posted by ChrisM23
Question for you Atlee, do you know where they install the inverter on the 22J? I just got one without an inverter, but thinking of installing with a solar setup. Just trying to figure out where it can fit..
|
__________________
Erroll and Mary Doss and Duffy (RIP)
2018 Jayco Redhawk 22J
2014 F150 SC, 4x4, HD Pkg, Sterling Gray
|
|
|
|
|
10-12-2020, 03:11 PM
|
#8
|
|
Junior Member
Join Date: Jun 2020
Location: Port Orchard
Posts: 4
|
I have a 29MV and know there are at least 2 items connected to the inverter as there are 2 wires coming out of the device. My inverter is installed under the bed support. The TV and something else which I have yet to find. I used a standard outlet tester and nothing by the bed is active with the inverter. Anyone else know what else may be?
|
|
|
|
|
10-12-2020, 04:23 PM
|
#9
|
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,109
|
Quote:
Originally Posted by Haroldpc
I have a 29MV and know there are at least 2 items connected to the inverter as there are 2 wires coming out of the device. My inverter is installed under the bed support. The TV and something else which I have yet to find. I used a standard outlet tester and nothing by the bed is active with the inverter. Anyone else know what else may be?
|
Unless you have 3 wires you only have one circuit on the inverter. 120 in and 120 out since the INVERTER has a built in transfer switch so the circuit is also hot on shore power.
__________________
DISNEY LOVERS
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
