We are camping this weekend and I had to remove the exterior speaker to make a repair. I notice that there is some type of white caulk coating the screws and screw holes and a clear silicone (?) sealing the outer perimeter. What should I purchase to reseal?
I was wondering something similar. The caulking on the piece of molding that runs down the side of my Seneca has separated a bit. Wondering what to use to fill in.
You do not want silicone! I use OSI Quad. You can get it in many colors at any of the large DIY stores. It is extremely sticky stuff. I tape off what I donot want caulk on, and use a super soapy solution to smoothly it.
I have heard of others using Pro Flex, but I have no experience with it.
Camping World also carries it if you don’t want to wait. A little Dawn in a bowl of water to wet your finger to smooth the bead works well.
__________________
2018 JayFlight SLX 212QBW
1999 Ford F-250 Super Duty Lariat SC, 7.3L PSD, 3.73
Transfer Flow 50 gal aux; Andersen WDH; Prodigy P2
😁 "If a man says he’ll fix something, he will. There’s no need to remind him every 6 months.