Quote:
Originally Posted by TomJayco
When I do a "retract all" for jacks, even the front landing gear completely retract which sends the front of the fifth wheel all the way to the ground. I come from a Coachmen Brookstone with electric jacks where retract all only retracted the 4 back jacks not the landing gear. Anyone familiar with the issue and know a workaround?
|
yes, use the hitch button
From the manual:
Hitch Recognition - Reconnecting to Tow Vehicle
1. To turn on the touch pad, press both "UP" and "DOWN" arrows (Fig. 1B and Fig. 1C) at the same time. The green indicator LED (Fig. 1A) will turn on.
2. Press "HITCH HEIGHT" (Fig. 1E). The rear jacks will retract.
3. The front of the trailer will raise to the height where the auto level sequence was started.
Note: If the front of the trailer was below level when the Auto Level process was initiated, the hitch recognition feature will retract the rear jacks but will not retract the front jacks to lower the trailer to the initial hitch height. This feature helps prevent injury and/or damage to anything underneath
the trailer.
4. Connect tow vehicle and make sure trailer and hitch are connected and locked.
5. Press "RETRACT ALL" System will immediately retract all jacks.
Linear Mode
