EO2 error.

[Jdmcla]

Well I was an idiot and left my batteries hooked up for a few days so the Xantrex did the auto shutoff thing I've been reading about. I hooked up my truck to get a little charge so I could start the Gen and charge them back up. Got the generator started and it's been running for a couple hours, but the Xantrex hasn't cleared out the EO2 code. And it's still reading 11.2 volts with the little green light flashing on the Input Voltage line. My next step is to pull the batteries, take em home and charge them individually. Just wanted to see if I'm missing something.

Sent from my SM-G930V using Tapatalk

[Grumpy]

Have you turned it off and then back on? I think it needs a reset to clear.

[Jdmcla]

Originally Posted by Grumpy

Have you turned it off and then back on? I think it needs a reset to clear.

I didn't but that makes sense. I did however get impatient and pulled the batteries. As soon as I shut down the Gen, the alarm went off and the EO2 thing never went away. Just hooked one of the batteries to the house charger and it's reading 95%. I'm going to charge both at the house, let the Seismic think about why it wants to be an a$$hole, then hook the batteries back up and go from there. Fun times!

Sent from my SM-G930V using Tapatalk