|
|
11-04-2018, 09:22 AM
|
#1
|
Senior Member
Join Date: Sep 2016
Location: Riverside
Posts: 323
|
Must have tools to travel with?
Help! I need to prepare a new tool box for my fifth wheel. Was wondering what other must have tools I should be packing? What some of your must haves?
Thanks in advance for your assistance.
Marko
|
|
|
11-04-2018, 12:52 PM
|
#2
|
Senior Member
Join Date: Nov 2017
Location: anytown
Posts: 1,751
|
AC/DC volt meter.
|
|
|
11-04-2018, 01:23 PM
|
#3
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Proper sized lug wrench or socket to fit the lug nuts.
I carry an assortment of wrenches, screw drivers, fuses, wire connectors, pliers, etc.
Keep some Dicor and/or eternabond tape as well.
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
11-04-2018, 01:31 PM
|
#4
|
Senior Member
Join Date: Feb 2017
Location: Gilroy
Posts: 475
|
Tie wraps of various sizes, duct tape, multi purpose glue, electrical tape. An electric screwdriver and assorted bits.
|
|
|
11-04-2018, 01:32 PM
|
#5
|
Senior Member
Join Date: Aug 2017
Location: Rock Island
Posts: 1,073
|
Sockets and electric drill for manual slide motors and to manually raise auto levelers.
__________________
2017 Eagle 291RSTS
2017 Chevy Silverado Duramax 2500
|
|
|
11-04-2018, 04:43 PM
|
#6
|
Senior Member
Join Date: Sep 2015
Location: Kansas City
Posts: 4,326
|
Quote:
Originally Posted by Magnolia Tom
Proper sized lug wrench or socket to fit the lug nuts.
I carry an assortment of wrenches, screw drivers, fuses, wire connectors, pliers, etc.
Keep some Dicor and/or eternabond tape as well.
|
I would add a bottle jack sufficient to lift your trailer in case you need to change a tire and a BFH.
__________________
Willie
1998 Jayco Eagle 12 UDK
2008 Keystone Cougar 29FKS
Poking at a campfire with a stick is one of life's great satisfactions.
|
|
|
11-04-2018, 05:32 PM
|
#7
|
Senior Member
Join Date: May 2016
Location: S. Indiana
Posts: 334
|
In addition to, or in lieu of the aformentioned equipment and tools - I carry a 1 1/2 ton aluminum floor jack (handle removes for compact storage) and cordless 1/2" impact gun w/sockets for truck & trailer.
__________________
2017 29RKS
2018 Ford F-250 Lariat, 4X4, 6.7L PSD, SC, SB
|
|
|
11-04-2018, 05:56 PM
|
#8
|
Senior Member
Join Date: Oct 2018
Location: Colorado Springs
Posts: 1,270
|
I carry a battery operated (uses my drill and impact driver batteries) compressor. It needs to be capable of 80PSI to do the truck and 5er tires. It also does my initial winterizing before heading into winter weather.
As others have listed . . . . Other than that, a small and large cresent wrench, pliers, wire cutter/stripper, screwdrivers, sockets for lug nuts and hitch bolts along with a torque wrench. I went cheap on tools, but not on quality. Older Craftsman hand tools at garage sales are a dime a dozen. I carry a roll of Teflon tape and duct tape.
I will say, I don't understand the 1 1/2 ton floor jack? 3,000 lbs wouldn't raise half of my smallest TT, much less half the 5er. A 12 ton bottle jack is under my seat.
|
|
|
11-04-2018, 06:54 PM
|
#9
|
Senior Member
Join Date: May 2016
Location: S. Indiana
Posts: 334
|
Quote:
Originally Posted by madmaxmutt
I will say, I don't understand the 1 1/2 ton floor jack? 3,000 lbs wouldn't raise half of my smallest TT, much less half the 5er. A 12 ton bottle jack is under my seat.
|
It may be marginal, but it will easily lift a single tire on my 29RKS enough to change it. It will also lift one wheel at a time on my Super Duty PSD. Much more stable, IMO, and easier to position - no need to crawl on the ground - works for me, but, might not work for everyone. I did have to craft a 4" spacer (you can buy them) in order to get a trailer tire off the ground an inch or so.
__________________
2017 29RKS
2018 Ford F-250 Lariat, 4X4, 6.7L PSD, SC, SB
|
|
|
11-04-2018, 06:59 PM
|
#10
|
Senior Member
Join Date: Oct 2016
Location: McCalla, AL
Posts: 1,228
|
As for me I keep a large roll of paper towels on both sides of the camper in the basement and plenty of bandages.
I usually always get dirty and eventually hurt myself.
|
|
|
11-04-2018, 07:19 PM
|
#11
|
Senior Member
Join Date: Oct 2018
Location: Colorado Springs
Posts: 1,270
|
Quote:
Originally Posted by jbrnigan
It may be marginal, but it will easily lift a single tire on my 29RKS enough to change it. It will also lift one wheel at a time on my Super Duty PSD. Much more stable, IMO, and easier to position - no need to crawl on the ground - works for me, but, might not work for everyone. I did have to craft a 4" spacer (you can buy them) in order to get a trailer tire off the ground an inch or so.
|
I can see that. I use one of these for tire changes on the trailer.
Although, I have not tried it on the 16" wheel/tire combo.
The jack is for real emergencies.
OP: Another thing I have carried for awhile is open ended lug nuts. My last trailer had closed end lug nuts. They fit the aluminum wheels, but not the old steelie spare tire rim.
Quote:
Originally Posted by 2naEagle
As for me I keep a large roll of paper towels on both sides of the camper in the basement and plenty of bandages.
I usually always get dirty and eventually hurt myself.
|
Literally LOL!
|
|
|
11-04-2018, 07:23 PM
|
#12
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Quote:
Originally Posted by madmaxmutt
I can see that. I use one of these for tire changes on the trailer.
Attachment 45351
Although, I have not tried it on the 16" wheel/tire combo.
The jack is for real emergencies.
OP: Another thing I have carried for awhile is open ended lug nuts. My last trailer had closed end lug nuts. They fit the aluminum wheels, but not the old steelie spare tire rim.
Literally LOL!
|
Trust me, the TrailerAide works on 16" wheels! When I replaced my tires the tire place used it and it worked on all 4 wheels!
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
11-04-2018, 07:32 PM
|
#13
|
Senior Member
Join Date: May 2016
Location: S. Indiana
Posts: 334
|
I can count on one hand the number of flat tires on my RV's over the past 25 years - knock on wood - this past fall, had a nail in a tire, I used my "Lego" levelers, built a pyramid. Pulled the trailer up on the pyramid and changed the tire. Later on, during the trip, another nail and another flat. Used the floor jack to lift the flat tire (truck disconnected) and get the flat repaired. Using a cordless impact gun made short work of the lug nuts. Plan on replacing all four tires next spring - LOL
__________________
2017 29RKS
2018 Ford F-250 Lariat, 4X4, 6.7L PSD, SC, SB
|
|
|
11-04-2018, 07:54 PM
|
#14
|
Senior Member
Join Date: Nov 2017
Location: Athens
Posts: 239
|
Carry all the tools you can afford $$ and weight. You know the old saying, you'll have everything you need except that one tool, when you need them. I also carry spray lithium grease
It's not really tools but, I always carry wasp spray, ant & roach killer have used both almost every summer.
__________________
TnHiker
2018 Jayco Eagle HT 29.5 FBDS: GY Tire Upgrade, Sani-Con, 2 AC's, Tankless WH, Auto level, One Control, RV-CO Port-A-Step
2010 Jayco Eagle Super Lite 30.5 DBSA (Sold 2018)
1998 HitchHiker II 31 RLBG (Sold 2012)
2002 Ford F350 7.3L Turbo, Crew Cab, DRW, 4:10 (Mint, Garage Queen)
|
|
|
11-04-2018, 08:12 PM
|
#15
|
Senior Member
Join Date: Aug 2017
Location: Rock Island
Posts: 1,073
|
I do have a flat repair kit, the kind to push the patch through the hole, just in case I get two flats in the middle of nowhere. Weighs nothing and takes up little room.
Infrared temperature checker, I check the temp on the tires and hubs at each stop.
__________________
2017 Eagle 291RSTS
2017 Chevy Silverado Duramax 2500
|
|
|
11-04-2018, 08:34 PM
|
#16
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Years an old timer told me to carry a flat piece of cardboard. I have found it to come in handy on Many Many occasions for laying on under the rig.
Also a selection of bolts and nuts if you have in floor slides because they never break at a garage. I carry 6 or 8 all the time and they have saved my trip many times.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
11-05-2018, 06:35 AM
|
#17
|
Senior Member
Join Date: Oct 2016
Location: Saint Thomas, PA
Posts: 2,234
|
I keep it simple and light.
Multimeter
1/4 drive rachet set
two different size adjustable wrenches
screwdrivers
Miniature screwdrivers
Screwdriver bit set
Electrical tape
Wire stripers and chrimpers
Duct tape
Spare fuses and screws
Some wire connectors
Torque wrench and socket for lugs
4-way lug wrench
Bottle jack
Spare pex quick connect fittings
Pex/tubing cutter
Hatchet/hammer
Thread tape
Always an auto parts or hardware store nearby for emergency supplies or tools.
Earl
__________________
2017 Eagle 293RKDS, factory ordered, lots of mods and upgrades. More than I can list.
2018 Ram 3500 crew cab long bed SRW diesel 6spd Aisin 4wd Tradesman.
B&W Ram puck 5th wheel
Line-X premium
Mopar wheel to wheel steps
|
|
|
11-05-2018, 07:18 AM
|
#18
|
Senior Member
Join Date: Apr 2018
Location: Somerset
Posts: 400
|
I have dedicated tools left in the 5er and also when I go on longer trips I take a 5 gallon bucket and load it up with my standard tool box stuff that I usually use around the house. Also have a large torque wrench, jacks and impact gun with too.
|
|
|
11-05-2018, 08:23 AM
|
#19
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
I might add, don't take anything that you don't want to or can't use. Just extra weight.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
11-05-2018, 09:23 AM
|
#20
|
Senior Member
Join Date: Feb 2017
Location: DFW
Posts: 2,229
|
When we first got the last trailer, I started from scratch on my travel tool box.
First, I made sure I had all I needed to adjust my hitch. Next was making sure I had all the stuff for a flat. Then I looked into manual operation of the slides and stabs. Lastly I threw in a cheapo driver set to fit all the different screw heads inside and outside of the trailer. On top of that stuff, a multi meter, zip ties, gorrilla tape, gorilla glue, plumbers tape, wood glue, wire stripper, spare fuses, various lubes and wasp spray. Sounds like a lot, but besides the various spray lubes it all fits in a normal size tool box in the storage bay.
__________________
2017 Eagle HT 26.5BHS Sold
2019 Eagle 321RSTS Sold
2024 Grand Design 310GK
2024 Chevy 3500HD DRW
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|