Just wondering if anyone knows what material they used at the factory when they install the Roof Ladder? To me it's looks like a cork type of material as like old school type of gassett. Mine is desolving and I would like to replace the material with one won't retain water. Any ideas?
Should be butyl tape that will last a long time. It will start expanding out with time and I just scrape the excess off with a plastic putty knife. You can also run a bead of sealant around the edge if you want.
__________________
RipinSC
2019 Eagle FW 321RSTS
2015 GMC 2500 HD 6.0 Gas
Should be butyl tape that will last a long time. It will start expanding out with time and I just scrape the excess off with a plastic putty knife. You can also run a bead of sealant around the edge if you want.
RipinSC.: I will give it a try. What do you recommend for the type of black color caulk that I need to redo where black trim meets the edge of rig?
RipinSC.: I will give it a try. What do you recommend for the type of black color caulk that I need to redo where black trim meets the edge of rig?
Marko
Marko, I am camping now and can’t remember the name. Someone else can chime in. You get it at any RV store. I use clear, it is an rv sealant that sticks well.
__________________
RipinSC
2019 Eagle FW 321RSTS
2015 GMC 2500 HD 6.0 Gas
So are you recommending QSI Quad Sealent the Window and Door type?
I see they have at Lowes and Home Depot.
Yep, that is what I use. It is extremely sticky stuff. I strongly recommend taping off anywhere you do not want it. The tape will give you good clean professional lines. I also use super soapy water to smooth it out.
Yep, that is what I use. It is extremely sticky stuff. I strongly recommend taping off anywhere you do not want it. The tape will give you good clean professional lines. I also use super soapy water to smooth it out.
How long does it take to dry to touch? Or what did you experience the cure / dry time to be for you?
DISNEY LOVERS
Linear Mode
