Tv set up

[Golfertoo]

The Furrion TV in the living room of our 2019 Jayco Eagle RSTS321 works fantastic.
We are unable to get the smaller Furrion in the bedroom to work.
Remote wi llNOT... no matter how hard we try... allow us to the CHANNELS icon to do the initial "channel search".
When fisrst turned on it indicates HDMI1 in the upper right corner... then, we go to set up... try lots of options... but, still no access to "Channel" function/icon!!
Any assistance would be greatly appreciated!!

[slevar]

HDMI will not allow a channel search if you are getting your signal off-air or cable. HDMI input would require a satellite or digital cable box for your channels. In that case you wouldnt need to search. Choose Air or Cable as your input then auto-scan should be available.

[Big1]

Yep, take it off of HDMI and what slevar said.

[Packerbacker_TX]

Originally Posted by Golfertoo

The Furrion TV in the living room of our 2019 Jayco Eagle RSTS321 works fantastic.
We are unable to get the smaller Furrion in the bedroom to work.
Remote wi llNOT... no matter how hard we try... allow us to the CHANNELS icon to do the initial "channel search".
When fisrst turned on it indicates HDMI1 in the upper right corner... then, we go to set up... try lots of options... but, still no access to "Channel" function/icon!!
Any assistance would be greatly appreciated!!

My quick .02 on the topic: Most televisions use the coaxial feed for OTA/Cable connections. If your TV doesn't have a coaxial hookup, there's a good chance it doesn't have a TV tuner either. Newer TV's (aka Smart TV's) tend to omit the TV tuner because they assume you're watching youtube over wifi instead. No tuner = no TV signal.

So if there's no coaxial connection or no tuner, you're stuck with an HDMI connection to a DVD/Blu Ray player/Etc. Lastly, make sure your input is set correctly. If you're plugged in, the TV should see the connection and display it.

Good Luck!

[Golfertoo]

Thank you...Will check it out!!!

[RichW]

Our 2019 Pinnacle has a power switch/box in a lower cabinet. Maybe yours is similar? Also, we are on MDMI3.

[Golfertoo]

Power box? What is this?

[RichW]

Our tv antenna is powered. The switch is in a cabnet to the left of the fireplace.