Woodyman

[dromero1967]

Hi everyone.
We have a 2017 open range 337RLS. 1999 F-350 Dually.
I'm searching for information on how to replace the aluminum right rear bottom: fender (not the plastic skirt).

[Jagiven]

Welcome aboard!

Are you talking about the actual aluminum siding? Or is it a trim piece? Can you post an image?

Nice part about aluminum sided campers, they are sided from the top down. There are lots of youtube videos showing them being resided.

[poohbear]

Originally Posted by dromero1967

Hi everyone.
We have a 2017 open range 337RLS. 1999 F-350 Dually.
I'm searching for information on how to replace the aluminum right rear bottom: fender (not the plastic skirt).

If it's the very rear bottom piece you just get a Dealer to order the piece. I just replaced this piece on our 321RLTS. It's 8 ft long so you must cut.
Last June my dealer only charged me $98 includeing the shipping. I'm a retired AC/sheetmetal guy & thought that was a deal allready painted to match.

[norty1]

My dealer ordered that piece for me and it was installed by a rv repair facility. The piece was the same color and had to be trimmed by the installer to fit the opening.

[poohbear]

Originally Posted by norty1

My dealer ordered that piece for me and it was installed by a rv repair facility. The piece was the same color and had to be trimmed by the installer to fit the opening.

I think I used 27 inchs for my repair. I have enough left for another uh oh .
FYI, it's a very easy repair. I used my bad section to mark & drill the screw/poprivet holes