Drill bit for 26BH

[Octopus Prime]

Does anyone with the 26BH know what drill bit you buy to lower and raise the jacks with a drill?

Sent from my Pixel XL using Tapatalk

[Sundancer330]

This is what you are looking for.

https://www.amazon.com/Camco-Levelin...k+drill+socket

[Iraqvet05]

I believe it's just a 3/4". I bought one at my dealer but the extension is welded crooked to the socket. Here's one on Amazon https://www.amazon.com/Camco-Levelin...+drill+adapter

[mmwhit]

Most are standard 3/4” for all travel trailers. I use a 3/4” deep socket with the attachment for a drill. I use a regular cordless drill and it works great. It sure beats hand cranking them down and its faster than electronic stabilizer jacks.

[Octopus Prime]

Is this for the stabilizer jacks or leveling jacks?

Sent from my Pixel XL using Tapatalk

[mmwhit]

This is for the stabilizer jacks. The leveling jacks are not common but they are probably the same size socket?

[Rustysocket]

Drill bits are used for drilling holes...

[Octopus Prime]

::blushing::

Sent from my Pixel XL using Tapatalk

[Rustysocket]

Originally Posted by Octopus Prime

::blushing::

Sent from my Pixel XL using Tapatalk

Thats allright ... lol

On my old trailer the jacks used a 3/4" socket. My new one has electronic levelling.

The easiest way to find out for sure is to use a tape measure across the head from flat to flat.

I used the camco one referenced above, but mine was welded crooked as well. So I just purchased a socket to drill adapter from the hardware store and used a deep socket. Most any hardware store will have what you need.

[Octopus Prime]

I ordered from Amazon, but I'll return it if it isn't the right one.

Sent from my Pixel XL using Tapatalk