Fresh Water/Holding Tank Levels
One thing I noticed on our first trip out with the new TT was that, while filling the fresh water tank, the amount of time to progress from "Empty" to "1/3" was proportionally much longer than the time to progress from "1/3" to "2/3" and "2/3" to "Full". Same thing happened while the water was being used.. It seemed to progress from "Full", "2/3", "1/3" quickly and read "Empty" most of the time we were camping. I'm just wondering if this is normal or if maybe the sensors in the tank are mounted in the wrong place.
Similarly, my grey tank seemed to reach "Full" quicker than I had expected.. When your grey tank reads "full", is it advisable to immediately stop using water and dump, or does "full" really mean there is still some room in the tank? We kept draining water for about a half day or so after it read "full" and didn't seem to have any problems. That being said, what is the worst that would happen? Would the drains just start backing up until I dump or would more serious problems occur?
__________________
2013 Jayco JayFlight 26BH
2013 Toyota Tacoma SR5 w/Towing Package
4-Point Equal-i-zer Hitch
Prodigy P2 Brake Controller
|