No power to rear slide out switch

[SchnaiTR]

Hello I have a 2006 Jayco eagle 322fks. There is no power to rear slide out switch. Motor can be jumped to operate slide in and out. There are four wires to switch two red, a black, and a white. One red and black go to the motor. Other red and white wire go forward on the frame. I need help finding the cause of no power. There is no relay for the rear slide out in the fuse panel. Any help would be much appreciated... thank you.

[ALJO]

There should be a fuse as if there would be none it would be a fire hazard. If you have no power at the switch, then you have to find why this circuit is failing. When you do have power at the switch, you have to check for power by the motor.

[SchnaiTR]

Originally Posted by ALJO

There should be a fuse as if there would be none it would be a fire hazard. If you have no power at the switch, then you have to find why this circuit is failing. When you do have power at the switch, you have to check for power by the motor.

I would think there has to be a relay for the rear slide out just as there is for the front slide out. There is only a relay for the front slide out in the fuse panel. I have not found any other relay or fuse panel for it. But power from the switch runs forward from the switch and have not located that.