Rear Ladder Help

[joe&judy]

bent to top of the rear latter towards the top of the camper, probably could be straighten and welded but does anyone know if I can just buy the two long runners on each side and change them only, the runs are all screwed into it, if not would have to replace the compete latter, and where would I get it beside the dealer that is a long ways from where I live, thanks for the help in advanced, Joe.

[OnTheGo]

If it was mine I would replace the entire ladder. Bending and straightening could weaken it. I don't like the idea of any DIY ladder repair or modification.

My guess is you could replace the ladder for not much more (maybe less) than professional repairs.

[JB13502]

Originally Posted by joe&judy

and where would I get it beside the dealer that is a long ways from where I live, thanks for the help in advanced, Joe.

Check etrailer.com, they might have what you're looking for.
https://www.etrailer.com/s.aspx?qry=Ladder+Hardware

If it were me, I would replace the whole ladder. They're not that strong to begin with.

[joe&judy]

OnTheGo, was going to change out the tubes the long runners, the steps screw in but with the attachment that JB sent might just get the hole ladder, I can weld it but would have to but tubing to replace the two top sections by the time I do all of that just as soon replace it, thanks you both for the help, Joe