Replacement Door for Outdoor Kitchen Door?

[WashingtonGirl98013]

We want to replace the door to our outdoor kitchen on our 2019 Jayco Flight SLX 8 324BDS. We can do fiberglass work--ourselves--if we need to, but we'd rather just purchase a new door. We certainly can install it.

We are irritated that Jayco did not put a serial or part number on the door itself and Jayco dealerships overcharge for so much that we'd prefer using an after-market brand. Does anyone have suggestions where online we can find a replacement door?

[norty1]

Try one of these sources: www.pplmotorhomes.com

[Rustic Eagle]

Welcome to JOF

Contact Jayco customer support (have VIN handy) and ask for the part number of the door in question and supplier name (?).

Also, Lippert (LCI) manufactures RV baggage and outside kitchen doors:

https://www.lci1.com/access-and-baggage-doors

Bob

[Loanman44]

[I have a new in the crate kitchen door in white QUOTE=WashingtonGirl98013;1022140]We want to replace the door to our outdoor kitchen on our 2019 Jayco Flight SLX 8 324BDS. We can do fiberglass work--ourselves--if we need to, but we'd rather just purchase a new door. We certainly can install it.

We are irritated that Jayco did not put a serial or part number on the door itself and Jayco dealerships overcharge for so much that we'd prefer using an after-market brand. Does anyone have suggestions where online we can find a replacement door?[/QUOTE]

[Loanman44]

Hello Can you give me measurements of your door? I think that I have it.

[WashingtonGirl98013]

We already purchased the Lippert version and installed it. Easy peasy.

[corneredge]

Originally Posted by Loanman44

Hello Can you give me measurements of your door? I think that I have it.

Just had a careless new rv owner destroy my outside kitchen door on my 2016 jayco 32tsbh.

Do you have this door?
Anyone know a ballpark replacement cost? I'm leaving here tomorrow and on the road.

Thanks!

[corneredge]

My measurements appear to be 68x44 inches

[gripfangwolf]

We are in a similar situation, I looked at the door and it appears to be a single unit, door. Hinge, and frame held in by rivets. How did you remove your old door and attach the new one you get from Lippert?

[corneredge]

Originally Posted by gripfangwolf

We are in a similar situation, I looked at the door and it appears to be a single unit, door. Hinge, and frame held in by rivets. How did you remove your old door and attach the new one you get from Lippert?

I was able to use my part number off the door and order a new one from lippert directly

Bolted right on and was easy to replace at home.