|
12-21-2015, 03:36 PM
|
#1
|
Junior Member
Join Date: Jan 2014
Location: St Catharines
Posts: 29
|
bathroom tap???
have a pinnacle 36kpts and have a leak in the bathroom taps, were you turn the water on, single lever, how do I open it and fix it and what make is it, cant find any info
|
|
|
12-21-2015, 04:19 PM
|
#2
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Most likely made by: Phoenix Faucets
If it is in warranty, give it to the dealer. If not, my experience is get one you like from Lowes or Home Depot and swap it out.
I could never get parts for them from the company. You could try to tighten it but I would not waste to much time on it.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
12-21-2015, 06:41 PM
|
#3
|
Junior Member
Join Date: Sep 2014
Location: Mechanicsburg
Posts: 11
|
Depends on where it is leaking. If it is leaking from under the base, you can try to tighten it from under sink. If that doesn't work, loosen it up completely and use plumbers putty instead of the rubber like seal.
If it is leaking from the handle, then the cartridge is probably bad. Take off the handle and remove the nuts and then remove the cartridge. Take the cartridge to your local Lowe's or Home depot, they should be able to match it for you.
Make sure to turn the water off before trying any repair.
The easiest, but most costly, would be to follow the previous posters advice and just get a new faucet to replace the leaking one.
|
|
|
12-21-2015, 06:49 PM
|
#4
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Good advice from the previous poster but you will not find parts if it is a Phoenix. Try and find a number or symbol on the faucet.
As someone on here posted, Google is your friend.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
12-22-2015, 02:46 PM
|
#5
|
Junior Member
Join Date: Jan 2014
Location: St Catharines
Posts: 29
|
how do you get the handle off, I see no way????
|
|
|
12-22-2015, 04:20 PM
|
#6
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Should be a small allen set screw somewhere on it. or a removable cap on the top that exposes a phillips head screw.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
12-22-2015, 05:34 PM
|
#7
|
Member
Join Date: Oct 2015
Location: New albany
Posts: 51
|
My kitchen sink had a small press on cap in the back and a set screw underneath it. Good luck
__________________
Here's to us and those like us
|
|
|
12-22-2015, 06:22 PM
|
#8
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
post a picture and I think we can identify where to get the handle off.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|