How bad do your floors squeak

hammerhead · 08-28-2017, 08:36 PM

We have a 2016 North Point 341 RLTS. Our floors squeak really bad. We are having the kitchen major floor squeak being fixed but now one by bathroom came up. Seems the major walk areas squeak. What about yours?

Earthmover · 08-28-2017, 08:55 PM

I have a 2016 355mbqs and i have developed a sqeek infront of the fridge and a soft spot as well. Will be taking it to get fixed.

Murff · 08-28-2017, 09:11 PM

Uh... what's a "floo"?

murff

BuddyRay · 08-28-2017, 10:08 PM

You know - in Harry Potter - the Floo network - where you throw this powder into the fireplace and "POOF" you step into another place.

rsday75 · 08-29-2017, 07:29 AM

Quote:

Originally Posted by Earthmover

I have a 2016 355mbqs and i have developed a sqeek infront of the fridge and a soft spot as well. Will be taking it to get fixed.

Interesting. We have the same model and have a soft spot starting in from of the fridge, but more over to in front of the bench seat/converter area.

Will be getting it looked at, too. Let me know what you find out. I will be taking ours in after our last scheduled trip in October.

Just odd that we both have this in the same area. Ours isn't soft, as much as a good amount of flex in the floor that makes it seem soft...

dmforce · 08-29-2017, 07:30 AM

Ours developed in our 29.5BHDS not 6 months in - in the main pathway from door to living area. Not happy.

Rock · 08-29-2017, 08:38 AM

Walking into my forward bath squeaks bad and is soft. I am having the factory fix it when they do my roof and slide and outriggers
Rock

**Crabman** · 08-29-2017, 10:19 AM

Quote:

Originally Posted by Murff

Uh... what's a "floo"?

murff

Corrected by Crabman

bdreinv · 08-29-2017, 12:21 PM

We have 16 Eagle 321 RSTS had a complete floor separation going across floor from dinette table under kitchen island to in front of stove.About a year ago.The repair involved removing and replacing all vinyl flooring. Now we have a floor separation in front of the frig which is a 1210 model.Attached is the floor assy. from Jayco.

Berg · 08-29-2017, 07:53 PM

2016 325BHQS. In the bedroom in front of the wardrobe closet and right in the middle of the living area by the kitchen island. Gets worse depending on the weather/humidity. But meh, more important things to worry about than squeaky floors...

hammerhead · 08-29-2017, 08:18 PM

Well, I guess it is more common than I thought. Ours is being repaired in November. It is so distracting, especially in early morning or night when you want to be a little quieter.

Tryintoretire · 08-30-2017, 07:15 AM

Quote:

Originally Posted by Rock

Walking into my forward bath squeaks bad and is soft. I am having the factory fix it when they do my roof and slide and outriggers
Rock

Rock,where are going to take yours for repair?

Tryintoretire · 08-30-2017, 07:16 AM

Do they replace the wood and vinyl ,typically?
How big a job is it?

jloco · 08-30-2017, 08:02 AM

17 months.. Zero floor squeaks thus far. Could be because I'm seasonal and the trailer hasn't moved since it was delivered in April 2016.

bdreinv · 08-30-2017, 08:38 AM

Our 16 Eagle 321 RSTS has a leveling problem the old out of stroke. Last week dry camped did not have enough blocks for rear jacks to auto level.OK inside developed squeak in floor in front of frig all week.Got home auto level worked perfect and to my amazement the squeak disappeared from in front of frig.Go figure!

vcbice · 08-30-2017, 06:02 PM

Ours has some squeaks. But, we've lived in it since Jan. If it didn't squeak a little bit I'd wonder what was wrong

P25ct · 08-30-2017, 06:31 PM

2016 Seismic- squeak in main living area, submitting for warranty

Sent from my iPad using Tapatalk

Rock · 08-30-2017, 08:29 PM

Tryintoretire
I have a factory appointment in Oct to get roof done, outriggers fixed and main kitchen slide removed to replace a bent roller. Main awning fixed and a dozen other things. Leaving truck there and have to fly back and back up again when ready. Had to pay extra for changeable tickets. Figure round trip will cost me around 1.5k-2k
Rock

P25ct · 08-30-2017, 09:35 PM

Quote:

Originally Posted by Rock

Tryintoretire
I have a factory appointment in Oct to get roof done, outriggers fixed and main kitchen slide removed to replace a bent roller. Main awning fixed and a dozen other things. Leaving truck there and have to fly back and back up again when ready. Had to pay extra for changeable tickets. Figure round trip will cost me around 1.5k-2k
Rock

Chief,

I would be interested to hear what roof repair, awning, and outrigger work you're doing out there. How did you find the roller was bent? Lastly how were you able to get an appointment out there? I have an appointment with our dealer who does great work in October to reinforce the roof under two of the three AC units that are sagging. I had the front one done past spring. They added steel supports. So frustrated. Other two are as bad as the front was last fall.

I really hope when she comes back you will truly be able to relax and retire. You deserve it sir. Thank you for your service!

Sent from my iPad using Tapatalk

Rock · 08-31-2017, 07:25 AM

P25ct
Made my appointment over six months ago. Roof Luann keeps lifting and pushing up the staples which some have came thru.

I spent days straightening two outriggers and bolting metal supports to them. Slide jammed. Pull down lower seal and u can see rollers. One bracket is rubbing thru bottom material.

Main awning forward bracket not bolted to FW straight and will not fully close unless u push on the arm. Awning material badly wrinkled where it attaches to the harder cover material and stitching failing.

Left front tire occasionally rubs on inside of lower slide wearing thru metal covering
Rock

You may also like: