|
|
03-03-2018, 05:42 PM
|
#1901
|
Senior Member
Join Date: Feb 2018
Location: Palmetto
Posts: 1,057
|
Nice mod. I might rethink mine. I removed mine because it wasted to much storage room.
__________________
2017 Jayco 377rlbh (sold)
2021 Grand Design 351MR
|
|
|
03-03-2018, 05:45 PM
|
#1902
|
Senior Member
Join Date: Feb 2018
Location: Palmetto
Posts: 1,057
|
Do you use it for your main power cord. I never actually tried it to see how it worked.
__________________
2017 Jayco 377rlbh (sold)
2021 Grand Design 351MR
|
|
|
03-03-2018, 05:48 PM
|
#1903
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by Cannon
Do you use it for your main power cord. I never actually tried it to see how it worked.
|
Yes. It works good. Just takes up a lot of space
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
03-03-2018, 06:07 PM
|
#1904
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Nice job as always Tom! I was going to do the same, but the DW says no more mods until we get back from Disney. I told her it was free, since I have the plywood and screws. She still said no. Her reasoning is because she worried about me for 2 days being up on the roof at the storage lot with no adult supervision, so this is my punishment.
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
03-03-2018, 06:10 PM
|
#1905
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Thanks Dan!
Just do it when she’s not looking. It shouldn’t take more than 15 minutes
Use some blocks or a jack to hold it up before you screw it in. Too bulky to hold with one hand and drill with the other
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
03-03-2018, 06:21 PM
|
#1906
|
Member
Join Date: Mar 2016
Location: Advance
Posts: 91
|
Know it been a while since anyone discussed brakes and grease. So here it goes. When I pulled my hubs found 2 of 4 had been leaking grease (front axle). Both rear axle brakes seem to have been dragging somewhat and grooved the hubs and magnets.
So installed all new backing plates and put new hubs on rear axle. Cleaned the hubs on front axle to remove all the grease. Installed new Timken bearings in all hubs.
Been a long day with multiple trips to the local trailer shop to get parts.
Glad I looked while installing wet bolt kit. Something would have failed before we made it to Key West at the end of the month.
No substitute for routine maintenance.
Jamie
__________________
2011 Ram Laramie 3500 DRW LB - 2016 377RLBH North Point - B&W Companion
|
|
|
03-03-2018, 06:23 PM
|
#1907
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Quote:
Originally Posted by Jamie846
Know it been a while since anyone discussed brakes and grease. So here it goes. When I pulled my hubs found 2 of 4 had been leaking grease (front axle). Both rear axle brakes seem to have been dragging somewhat and grooved the hubs and magnets.
So installed all new backing plates and put new hubs on rear axle. Cleaned the hubs on front axle to remove all the grease. Installed new Timken bearings in all hubs.
Been a long day with multiple trips to the local trailer shop to get parts.
Glad I looked while installing wet bolt kit. Something would have failed before we made it to Key West at the end of the month.
No substitute for routine maintenance.
Jamie
|
That's a beat down job Jamie. Glad you got it taken care of before your trip.
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
03-03-2018, 06:43 PM
|
#1908
|
Member
Join Date: Mar 2016
Location: Advance
Posts: 91
|
Quote:
Originally Posted by Bookemdanno
That's a beat down job Jamie. Glad you got it taken care of before your trip.
|
Ya, me too. When are you headed to Disney? Love staying at Ft Wilderness.
__________________
2011 Ram Laramie 3500 DRW LB - 2016 377RLBH North Point - B&W Companion
|
|
|
03-03-2018, 06:44 PM
|
#1909
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Quote:
Originally Posted by Jamie846
Ya, me too. When are you headed to Disney? Love staying at Ft Wilderness.
|
We leave on Friday morning and arrive on Sunday.
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
03-03-2018, 06:50 PM
|
#1910
|
Member
Join Date: Mar 2016
Location: Advance
Posts: 91
|
Quote:
Originally Posted by Bookemdanno
We leave on Friday morning and arrive on Sunday.
|
Enjoy and safe travels.
__________________
2011 Ram Laramie 3500 DRW LB - 2016 377RLBH North Point - B&W Companion
|
|
|
03-03-2018, 06:54 PM
|
#1911
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Quote:
Originally Posted by Jamie846
Enjoy and safe travels.
|
Where are you staying down in the Keys? I've camped at Bahia Honda SP & Long Key in the past. Long Key is awesome...each site separated by pine trees...and you have you're own beach behind each site.
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
03-03-2018, 06:59 PM
|
#1912
|
Member
Join Date: Mar 2016
Location: Advance
Posts: 91
|
Quote:
Originally Posted by Bookemdanno
Where are you staying down in the Keys? I've camped at Bahia Honda SP & Long Key in the past. Long Key is awesome...each site separated by pine trees...and you have you're own beach behind each site.
|
This time we are staying at Keys Palm RV Resort on Key Largo. Last time we stayed at Blue Water Key, it was a very nice place.
__________________
2011 Ram Laramie 3500 DRW LB - 2016 377RLBH North Point - B&W Companion
|
|
|
03-03-2018, 08:26 PM
|
#1913
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Good job on catching it Jamie. I know what crappy brakes are like and it’s no bueno. Took me a lot longer to find my problem then you. Now, you get to enjoy the trip without worrying about your brakes
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
03-03-2018, 08:33 PM
|
#1914
|
Senior Member
Join Date: Apr 2016
Location: Full timing in the 377, but Llano, Texas is now home
Posts: 842
|
Quote:
Originally Posted by Magnolia Tom
Seems like it’s been forever since I’ve done anything to the trailer. There was some discussion about the cord reel a while ago and mounting it upside down. Here it is. I used a scrap piece of 1/2” plywood I had laying around. Couple screws and done. Nice to free up some space.
One thing to be aware of if you mount it in the same place as I did....make sure it is far enough away from the door to clear the back of the ground control keypad/box. I didn’t pay attention at first and had to move it after I had it all secured.
Sent from my iPhone using Tapatalk
|
Looks very nice Tom. What happened to the Xantrex Inverter mounted in that area? With me, I can't afford the room with two large containers to get out from that door. As you know I have my 16" telescope and Binocular mount on the other side which takes 1/4 of the basement.
__________________
2007 Dodge Ram 3500 Laramie MC 4x2 DRW 6.7CTD, B&W Companion Slider 3405, Edge Evolution CS (deleted DPF/DOC-special tune), TireMinder TM-77, Firestone air springs, CustomFlow tailgate, Tonnosport tonneau cover, Champion 3100w genset
2017 Jayco North Point 377RLBH w/Kodiak disc brakes/Titan actuator, Truma AquaGo Comfort, Sailun S637, home of Darin & Dana. Where the 377 has been towed since 5/27/16:
|
|
|
03-03-2018, 08:42 PM
|
#1915
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
The inverter is still there. You can’t see it in the picture but it is still accessible. It’s between the front wall and the cord reel
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
03-03-2018, 09:12 PM
|
#1916
|
Senior Member
Join Date: Dec 2016
Location: Austin, Texas
Posts: 512
|
Nice mod BUT...wont you get tired standing on your head reading the labels?
__________________
2021 Coachmen Freelander 29KB
2019 Jeep Wrangler Sahara
NSA Ready Brute Elite II tow bar
|
|
|
03-03-2018, 09:44 PM
|
#1917
|
Senior Member
Join Date: Apr 2016
Location: Full timing in the 377, but Llano, Texas is now home
Posts: 842
|
Quote:
Originally Posted by Magnolia Tom
The inverter is still there. You can’t see it in the picture but it is still accessible. It’s between the front wall and the cord reel
Sent from my iPhone using Tapatalk
|
Ok I see now. I remember seeing on another forum here where a cord reel was installed at the rear behind the rig outlet. It was a rough job as the guy described it. That would be a prime engineering marvel for Jayco to make that standard. No more screwing and unscrewing that dreaded plastic ring.
__________________
2007 Dodge Ram 3500 Laramie MC 4x2 DRW 6.7CTD, B&W Companion Slider 3405, Edge Evolution CS (deleted DPF/DOC-special tune), TireMinder TM-77, Firestone air springs, CustomFlow tailgate, Tonnosport tonneau cover, Champion 3100w genset
2017 Jayco North Point 377RLBH w/Kodiak disc brakes/Titan actuator, Truma AquaGo Comfort, Sailun S637, home of Darin & Dana. Where the 377 has been towed since 5/27/16:
|
|
|
03-03-2018, 11:06 PM
|
#1918
|
Senior Member
Join Date: Feb 2018
Location: Palmetto
Posts: 1,057
|
Quote:
Originally Posted by Jamie846
This time we are staying at Keys Palm RV Resort on Key Largo. Last time we stayed at Blue Water Key, it was a very nice place.
|
How was Blue Water Key? Were going there for a week in Sep.
__________________
2017 Jayco 377rlbh (sold)
2021 Grand Design 351MR
|
|
|
03-04-2018, 06:42 AM
|
#1919
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,099
|
Quote:
Originally Posted by Magnolia Tom
Seems like it’s been forever since I’ve done anything to the trailer. There was some discussion about the cord reel a while ago and mounting it upside down. Here it is. I used a scrap piece of 1/2” plywood I had laying around. Couple screws and done. Nice to free up some space.
One thing to be aware of if you mount it in the same place as I did....make sure it is far enough away from the door to clear the back of the ground control keypad/box. I didn’t pay attention at first and had to move it after I had it all secured.
Sent from my iPhone using Tapatalk
|
Looks great Tom......
Buy you need to peel the sticker off and put it on right side up so you are in profile. LOL
Is your power cord removable?
Sent from my iPhone using Tapatalk
__________________
Jack
2016 Pinnacle 36 KPTS
2016 F350 Lariat CC LB dually 6.7
|
|
|
03-04-2018, 06:44 AM
|
#1920
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,099
|
Quote:
Originally Posted by Bookemdanno
Nice job as always Tom! I was going to do the same, but the DW says no more mods until we get back from Disney. I told her it was free, since I have the plywood and screws. She still said no. Her reasoning is because she worried about me for 2 days being up on the roof at the storage lot with no adult supervision, so this is my punishment.
|
LOL
That’s funny Dan
Sent from my iPhone using Tapatalk
__________________
Jack
2016 Pinnacle 36 KPTS
2016 F350 Lariat CC LB dually 6.7
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|