|
08-19-2013, 08:22 PM
|
#1
|
Junior Member
Join Date: Aug 2013
Posts: 3
|
Atwood Furnace not functioning
I bought a used 2007 Jayco tent trailer (model 1007) and my family and I love it. Everthing in the tent trailer works. But the furnace won't kick on. The previous owner never used it. It still had the owners manual attached inside. I've followed the directions, but nothing happens. The thermostat to the furnace has two controls: one to adjust the temp and a little switch that says off. It tried moving the switch from the off position but it feels stuck and I don't want to force it too much or it'll break. What should I do?
|
|
|
08-19-2013, 08:25 PM
|
#2
|
Senior Member
Join Date: Jun 2013
Posts: 260
|
Force it,,, you will not break it. I had the same issue as well as others.
__________________
2013 Jayco Sport
Ontario, Canada
|
|
|
08-19-2013, 10:46 PM
|
#3
|
Junior Member
Join Date: Aug 2013
Posts: 3
|
Thanks. I'll give it a try. When I switch it on, how far over will the switch go? I don't want to overdo it and break it.
And if I get the switch to move over to the on position, should I hear the furnace immediately turn on?
|
|
|
08-20-2013, 06:46 AM
|
#4
|
Senior Member
Join Date: Apr 2013
Location: Cleveland
Posts: 1,448
|
Atwood Furnace not functioning
The on switch doesn't move to far, but it is really tight and takes some "force" to move it.
Once the switch is "on" and you move the temp lever to call for heat, you should hear the fan come on, then a few clicks before the burner ignites and you have heat.
This is assuming you have a battery (or shore power) and have the propane tank valve open.
__________________
2013 Jayco JayFlight 26RKS
2013 Ford F150 Ecoboost FX4
2003 Coleman Bayside / 2011 Jayco Jayfeather X20E -- RIP
2012 Tacoma Sport DCSB / 2013 Tundra SR5 - RIP
|
|
|
08-20-2013, 04:44 PM
|
#5
|
Senior Member
Join Date: Jun 2012
Location: Southwest Alberta
Posts: 116
|
Push hard, you will feel a click and it move maybe a 1/4 inch to the on position. If the furnace has never been used turn it up fairly high, it will give you quite a burning smell the first couple of cycles - best to do that before you are in the campsite ready to turn in.
__________________
K & D
2010 Jayco EXP 213
2008 GMC Sierra 2500 SLE Z71
|
|
|
08-20-2013, 09:17 PM
|
#6
|
Junior Member
Join Date: Aug 2013
Posts: 3
|
Thanks for your help. I got it to work!
|
|
|
08-21-2013, 07:07 AM
|
#7
|
Senior Member
Join Date: Jun 2013
Posts: 260
|
Excellent! Congratulations!!! I had the same issue with my new Sport 10... unfortunately tried to use the furnace for the 1st time while at the campsite and it was getting really cold. Fortunately though, I had wifi and was able to find on the forum the same issue you had!
__________________
2013 Jayco Sport
Ontario, Canada
|
|
|
11-08-2015, 12:55 AM
|
#8
|
Senior Member
Join Date: Mar 2015
Location: Southern California
Posts: 572
|
Just want to say thanks here! So glad I found this post. At campsite now and cold! Couldn't figure out the darn thermostat. Lever felt stuck in off position too and I was afraid to force it. You'd think there would also be an arrow pointing towards on as,well.
Also brought a portable heater to use to save on propane. Another great tip from forum members!
__________________
2016 Jay Feather X254
2001 Ford Excursion 6.8L V10 4.30's
Equal-i-zer 1000/10,000 WDH
Previous TV: 2004 Ford Exedition w/ heavy duty tow package[/COLOR]
|
|
|
11-21-2016, 09:30 AM
|
#9
|
Junior Member
Join Date: Nov 2016
Location: Macon
Posts: 2
|
Heat won't come on
No heat..thermostat is on, temp set high..brand new 2017 Jay flight slx, what now..burners on stove work, hot water heater works..baffled.
|
|
|
11-21-2016, 09:36 AM
|
#10
|
Senior Member
Join Date: Nov 2015
Posts: 1,036
|
Quote:
Originally Posted by jaynescott
No heat..thermostat is on, temp set high..brand new 2017 Jay flight slx, what now..burners on stove work, hot water heater works..baffled.
|
Welcome to JOF.
Do you hear any clicking noise from the igniter?
We suggest a phone call to Jayco support or the local dealer for more real time assistance.
Please let us know the outcome.
|
|
|
11-21-2016, 09:37 AM
|
#11
|
Senior Member
Join Date: Dec 2014
Location: FL
Posts: 11,281
|
Welcome to the forum.
Quick questions...
Do you have 12v power?
Does the furnace fan come on? (the fan starts blowing before the furnace will fire)
Is the thermostat set to heat? (it also controls the air conditioner)
Did the furnace blow warm air during the PDI?
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
|
|
|
11-21-2016, 12:09 PM
|
#12
|
Senior Member
Join Date: Aug 2015
Location: Ottawa, ON
Posts: 1,967
|
Quote:
Originally Posted by oldmanAZ
Welcome to the forum.
Is the thermostat set to heat? (it also controls the air conditioner)
|
Just to reduce possible confusion, I have never seen a thermostat in a pup that controlled both. That is only on bigger trailers. Your AC controls are generally on the AC unit itself.
__________________
2011 Jayco X19H (purchased 2015)
2008 Jayco 1007 PUP (purchased new, traded for the X19)
2018 Nissan Titan Midnight Ed.
|
|
|
11-21-2016, 12:26 PM
|
#13
|
Senior Member
Join Date: Dec 2014
Location: FL
Posts: 11,281
|
Quote:
Originally Posted by jaynescott
No heat..thermostat is on, temp set high..brand new 2017 Jay flight slx, what now..burners on stove work, hot water heater works..baffled.
|
Quote:
Originally Posted by bankr63
Just to reduce possible confusion, I have never seen a thermostat in a pup that controlled both. That is only on bigger trailers. Your AC controls are generally on the AC unit itself.
|
Maybe we were replying to different posts?
Not all SLX units are 'pups'. I see some that are listed as 36'! Hopefully jaynescot's problems are resolved and they will respond to let us know what worked... and what model they have.
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
|
|
|
11-21-2016, 02:16 PM
|
#14
|
Senior Member
Join Date: Aug 2015
Location: Ottawa, ON
Posts: 1,967
|
Quote:
Originally Posted by oldmanAZ
Maybe we were replying to different posts?
Not all SLX units are 'pups'. I see some that are listed as 36'! Hopefully jaynescot's problems are resolved and they will respond to let us know what worked... and what model they have.
|
Just because this thread is in the Pop Up Camper's sub-forum. I agree the piggyback poster is probably not a pup, but people in this sub-forum are usually looking for answers about pups and we wouldn't want them getting confused looking for a switch/setting that isn't there.
Most of the previous issues noted on here were for the notoriously sticky thermostat power switches; ours was the same in the pup, and isn't any better in our HTT which also does not have integrated HVAC systems. Most of the smaller Jayco units will not have integrated AC and Heat controls.
__________________
2011 Jayco X19H (purchased 2015)
2008 Jayco 1007 PUP (purchased new, traded for the X19)
2018 Nissan Titan Midnight Ed.
|
|
|
11-22-2016, 06:57 AM
|
#15
|
Junior Member
Join Date: Nov 2016
Location: Macon
Posts: 2
|
No heat
Took camper to dealership..faulty thermostat.. Yay..not operator error..lol..thanks
|
|
|
11-22-2016, 08:31 AM
|
#16
|
Senior Member
Join Date: Dec 2014
Location: FL
Posts: 11,281
|
Thank you. Appreciate the update.
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|