If your switch panel resembles the attached one, the center light will illuminate when you turn the gas switch on. It then goes off when the flame is detected. The lights in the individual switches should remain on when they are turned on.
The picture shows the black version of the switch panel. I installed the white version which had switches that lit up. At least I think the panel came that way. I may have swapped out the switches for lit ones. Can't remember.
In any event, in gas mode you WANT the center light to go off. If it doesn't then you probably have a problem with the flame lighting.
__________________
Jim
Retired electronic technician (45 years in the field)
2017 Greyhawk 29W (solar & many other mods)
wife (maybe I should have given her top billing)
|