Slides and awning not working

[Seismic01]

I got a 2020seismic 4113 and I can not get the slide outs to retract or do anything also the awning will not move i checked all fuses I know of, any of you had this problem before is there a hidden switch or breaker somewhere ? Thanks I’m advance

[Parrott]

Do you have 12 volts to the lights? There is a breaker close to the batteries. Looks similar to this.

[Seismic01]

Yes I have that

[Parrott]

Originally Posted by Seismic01

Yes I have that

Is it tripped? Check for 12 volts in and out. If it’s tripped the yellow flag will be sticking out. Do your fuses have a red light beside them to let you know they are blown? Do you have a multimeter?

[Seismic01]

Yes I have a multimeter and no it was not tripped I have no blown fuses that I can see although I have four auto reset fuses so I’m going to replace them today, because you can’t tell if they are blown or what

[Kmo]

I know on my seismic there are fuses in the basement to operate the awnings with my phone and I had one of those fuses come loose and they wouldnt operate, not sure if that helps any thing but anothe spot to look at.

[Parrott]

Originally Posted by Seismic01

Yes I have a multimeter and no it was not tripped I have no blown fuses that I can see although I have four auto reset fuses so I’m going to replace them today, because you can’t tell if they are blown or what

Just check for power on both sides of the resettable fuses.

[Parrott]

I do know on my Jayco Precept that if this fuse, the top one is out, neither of my 3 slides will work. I have a call in to Jayco to see what it controls. It doesn’t say anything about the slides on the diagram. I actually took my fridge off off it and put it on number 2 because I kept getting low voltage on my fridge.

[Seismic01]

I appreciate all the help guys, so funny update story sat I was on the phone with lippert and was trouble shooting with them and they told me to shut off shore power then shut off battery power to check resistance on the omega controller underneath in basement,so I did and all the readings came back good and she said we will further trouble shoot on Monday we’ll I turned the battery power back on but forgot to plug back in to shore power , came back 6 hours later and my inverter was beeping because the system dropped below 12 volts so I plugged in to shore power and now my two awnings and 1 slide works���� but the front slide still does not work for whatever reason still got to figure that one out����*♂️