Jayco RV Owners Forum

Thread Tools Display Modes
Old 01-01-2017, 08:48 PM   #1
Junior Member
Join Date: Dec 2016
Location: cumming
Posts: 17
Swintek Slide Lubrication

Sorry if this has already been covered. I am a bit confused on the proper lubricant for the Swintek slides. I own a 2015 310W Siesmic. I understand the track itself is to be left alone. But the Block located just behind the rubber seals need to be lubricated with a PTF dry lube. Is this correct?

EdBob is offline   Reply With Quote
Old 01-01-2017, 09:29 PM   #2
Senior Member
shadester's Avatar
Join Date: Mar 2016
Location: Upstate N.Y.
Posts: 319
When I originally had problem with my slides the tech where I purchased my unit gave me a can of spray white lithium grease. Was told to spray all tracks and that would take care of it. Wrong.....Had to have it steam cleaned off. Another tech from another dealer came out and I was instructed to use this (CRC Syntha-Tech Lubricant with PTFE). Was told to spray the tracks and that area just behind the corner seal. Also told never to wax painted face of side of slides but wipe it down with spray silicone and a rag. Also use the foam seal conditioner on the main seals and wipe evenly on with rag. So hopefully this is the correct information.... but this is what I was instructed to do.
shadester is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 06:13 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.