Tank heaters falling off....

[Keith955]

My tank heaters were hanging half off when I got home from the dealer the first time. I used Locktite spray adhesive then taped the edges with hvac foil tape. It's been ok so far. I've found so many examples of poor design, poor construction and poor quality it blows my mind. 2021 Greyhawk Prestige 29MVP.

[mcconnellsts]

Has anyone ever taken it back to have "THEM" fix it...it seems that those are under warranty and I'd have them fix what should have been done correctly in the first place...that's my solution...

[Rozensky]

Originally Posted by mcconnellsts

Has anyone ever taken it back to have "THEM" fix it...it seems that those are under warranty and I'd have them fix what should have been done correctly in the first place...that's my solution...

The wait time in getting anything back from service is soooo long, if you can easily do it yourself, it’s the better route.

[Jopopsy]

Originally Posted by mcconnellsts

Has anyone ever taken it back to have "THEM" fix it...it seems that those are under warranty and I'd have them fix what should have been done correctly in the first place...that's my solution...

I did. The dealer did some spray adhesive fix. They still started to fall off. Framing the pads w/ Eternabond (after cleaning the mating areas w/ acetone) worked like a champ for me.

[Foretm]

Originally Posted by mcconnellsts

Has anyone ever taken it back to have "THEM" fix it...it seems that those are under warranty and I'd have them fix what should have been done correctly in the first place...that's my solution...

I had mine in for other items and my dealer replaced the ones falling off with new ones. My guess is it'll happen again at some point, and when it does, i'll fix it myself this time.