Welcome to JOF
Originally Posted by jeff_d
snip..... Is this normal or did the factory forget to put a final caulk around the sides of the doors and windows?
Unfortunately this is normal.
If there isn't any, I would add some clear silicone caulk along the top seam and a few inches down the side seam of all the windows (like the door)......., those foam/rubber gasket seals can be problematic. Also confirm that all the caulking that has been applied by the factory is adequate (especially the roof area).
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)