|
Coleman Mach Condensate Drains
I had to unstop the condensate drains recently when camped. There are two drains in a small plastic tray under the evaporator, one at each end. The drains are in a plastic fitting, one at each end of the plastic tray. Does anyone know if the drains holes just go just straight through the fitting and drain out the bottom of the fitting, or is there a hole into the top of the fitting that turn 90 degrees and drains out the side of the fitting? The holes of whatever shape are rather small - maybe 1/16 or 1/8 of an inch. Is there any reason not to drill out the holes to maybe 3/16 inch or 1/4 inch?
__________________
There's lots of advice and information in forums... sometimes it is correct. For example, all of my posts are made by a political appointee who got the job as a reward for contributions to my diesel bill.
2011 Jayco 28.5RLS; 2021 Chevy Duramax; Pullrite Superglide Hitch
|
Linear Mode
