Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-15-2022, 11:54 AM   #1
Member
 
Join Date: Mar 2021
Location: Hardeeville
Posts: 48
Power interruption/blink

2021 Jayco Pinnacle
About two to three times a week we get a very short "blink" in power. This shuts down the lights and Air Conditioners. When this happens I can immediately turn the lights back on and then go restart the A/C. My Progressive Industries shows no error. The resort has looked an the post but couldn’t find anything wrong.
Has anyone else experienced this problem or have any suggestions as to where to look next?
Blue is offline   Reply With Quote
Old 06-15-2022, 12:05 PM   #2
Senior Member
 
Grumpy's Avatar
 
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,109
Do you have a transfer switch?
__________________
DISNEY LOVERS
Grumpy is offline   Reply With Quote
Old 06-15-2022, 12:10 PM   #3
Member
 
Join Date: Mar 2021
Location: Hardeeville
Posts: 48
Hmmm. Although I do not have a generator the unit is wired for a generator so I assume I have a transfer switch. But many installing a TX switch is part of the gen install.
Maybe some one could shed some light on this.
Blue is offline   Reply With Quote
Old 06-15-2022, 12:18 PM   #4
Senior Member
 
Join Date: Jun 2016
Location: Newburgh
Posts: 6,307
I have my progressive Industries EMS set to wait 2:00 minutes before allowing power to the coach. This applies to initial plug in, after an actual power outage or even when there is a momentary blip like you are describing. I do this mostly tp protect the AC Compressor. My wife complains sometimes about the 2 minute delay but I like it as an added safety precaution.
__________________

2022 33RBTS
Progressive Industries EMS - Hardwired
Equalizer 4 Point WDH
2021 Ford F350 7.3
Air Lift Rear Bags w/ On Board Compressor (Pending)
2016 28BHBE - (Traded and Missed already)
Marcm157 is offline   Reply With Quote
Old 06-15-2022, 12:45 PM   #5
Member
 
Join Date: Mar 2021
Location: Hardeeville
Posts: 48
When I had the Phaeton 42LH the PI had a delay for that very reason which makes me wonder that either the power blink is short enough that the PI doesn’t see it (doubtful) or the issue is the JayCommand.
Forgot to mentioned that the first time this happened the PI showed an open ground error. After the resort looked that the post the PI shows no error.
Perhaps there is some anomaly that is causing the JayCommand to shut everything down.
I may have to call JAyCommand manufacturer.
Blue is offline   Reply With Quote
Old 06-15-2022, 02:12 PM   #6
Senior Member
 
Grumpy's Avatar
 
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,109
If it's prewired for a geny then you have a TS. I would check the connections in it to be sure none are loose just to eliminate it as the cause.
__________________
DISNEY LOVERS
Grumpy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 04:12 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.