Brake controls

[hotrod51]

Just got back from a two week trip with our 24FBS. I found the brake control never seemed to be set quite right. Its an old Tekonsha I think it was a Voyager. Just wondering if the newer Digital controls are better and which one. And is there something wrong with mine

[Midnightmoon]

1st, go back through the adjustment procedure on the Voyager if you haven't already. I have 2 Tekonsha Voyager controllers in 2 different trucks. One of those controllers is well over 15 years old and has hundreds of thousands of miles on it. They are generally a very reliable controller. But anything is possible. Also be sure to check all of your connections for loose wires, grounds, etc.

As far as the new controllers are concerned, I have a Tekonsha Prodigy P3 in my van. Great little controller. Works well and highly recommend across the rv world.

[robkelly]

I had a Prodigy P2 in my first TV and was very happy with it, and in fact like it better than the factory controller I have now.

As Midnightmoon suggests, go back through your adjustment procedures and check all connections.

[vcbice]

One other thought. When my controller (Prodigy) is set just right I don't notice it working at all. Truck and trailer stop as one.